Hi I am attempting my first oil change on this car and have to ask how does one get the filter cap past the fire wall? Does that middle bolt also need to be taken off? I' ve done my '99 and my '94 wagon dozens of times but this is my first time on my new to me car.

__________________
dtf
1994 E320 Wagon (Died @ 308,669 miles)
1995 E300 Diesel (228,000)
1999 E300 Turbodiesel ( died @ 255,000)
2006 Toyota Tundra SR5 AC 4X4 (115,000 miles) rusted frame - sold to chop shop
2011 Audi A4 Avant (165,000 miles) Seized engine - donated to Salvation Army
BMW 330 xi 6 speed manual (175,034 miles)
2014 E350 4Matic Wagon 128,000 miles
2018 Dodge Ram 21,000 miles

Yes. BEFORE you take out the outer two nuts, the LOOOOONG AND DELICATE center bolt must be removed.

__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread
"as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do!

My drivers:
1987 190D 2.5Turbo
1987 190D 2.5Turbo
1987 190D 2.5-5SPEED!!!

1987 300TD
1987 300TD
1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!

Also, you will need to change the two o-rings at the end of the center "bolt" it needs the 6mm x 10mm and a 7mm x 11mm o-ring. You can use two 6mm rings.

__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread
"as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do!

My drivers:
1987 190D 2.5Turbo
1987 190D 2.5Turbo
1987 190D 2.5-5SPEED!!!

1987 300TD
1987 300TD
1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!

I would say that it's a good idea to change those O rings, but don't sweat it if you want to change the oil now and order the rings for next time. I change mine every couple years.

Rgds,
Chris W.
'95 E300D, 424K

__________________
Objects in closer are mirror than they appear.

Success! Thanks guys. Similar set up to om606 turbo in the '99 but not sure that oil flows up the tube like the '95. Also that tube is attached to the cap on the '99 but plenty of room to get it out.

I changed over to delvac 1300 from the previous owner who used rotella synthetic and i swear the car sounds like a race car with the delvac 1300

__________________
dtf
1994 E320 Wagon (Died @ 308,669 miles)
1995 E300 Diesel (228,000)
1999 E300 Turbodiesel ( died @ 255,000)
2006 Toyota Tundra SR5 AC 4X4 (115,000 miles) rusted frame - sold to chop shop
2011 Audi A4 Avant (165,000 miles) Seized engine - donated to Salvation Army
BMW 330 xi 6 speed manual (175,034 miles)
2014 E350 4Matic Wagon 128,000 miles
2018 Dodge Ram 21,000 miles

Haha....I remember fighting with that thing with my 95 and finally managing to get it out....only realizing later that I could remove the center bolt!

So it can be done....just not advisable.

__________________
14 E250 Bluetec 4Matic "Sinclair", Palladium Silver on Black, 154k miles
06 E320 CDI "Rutherford", Black on Tan, 172k mi, Stage 1 tune, tuned TCU
91 300D "Otis", Smoke Silver, 142k mi, wastegate conversion

19 Honda CR-V EX 61k mi
Fourteen other MB's owned and sold
1961 Very Tolerant Wife

I briefly thought about carving out the foam on the fire wall after i saw the o ring fall out of the cap......I thought 'well I'm almost past the point of no return'

__________________
dtf
1994 E320 Wagon (Died @ 308,669 miles)
1995 E300 Diesel (228,000)
1999 E300 Turbodiesel ( died @ 255,000)
2006 Toyota Tundra SR5 AC 4X4 (115,000 miles) rusted frame - sold to chop shop
2011 Audi A4 Avant (165,000 miles) Seized engine - donated to Salvation Army
BMW 330 xi 6 speed manual (175,034 miles)
2014 E350 4Matic Wagon 128,000 miles
2018 Dodge Ram 21,000 miles