Problems with ac mounting... - PeachParts Mercedes-Benz Forum

hjoab · #1 10-20-2014, 10:21 PM

Quote:

Originally Posted by dmorrison

For MercFan

Removing the Ac compressor belt.

Loosen the 3 bolts on the back of the compressor. Photo #1. IF you completely remove the bolts, keep track of which washer/separator goes where.
Now adjust the tension using the adjusting nut as show in the picture. Photo #2.

Removing the power steering pump belt.

Loosing the 3 bolts in the rear of the pump. See Photo #3 and #4. I did not get down far enough to get the bottom inboard bolt head.
BE CAREFUL NOT TO PINCH OR CUT THE CLEAR PLASTIC DIESEL FUEL LINE NEAR THE ONE BOLT
Adjust the tension with the adjusting bolt. Photo #5

Dave

Hi

I 'm having a problem with the AC compressor. I've lost the bolts on the way and I have to replace them but don't remember how they were or go thru (washers/spacers) and yours one looks like mine one (it seems by your pics). can you help me on this?
PLz look at w123.130 1984 AC compressor mounting bolts lost - Mercedes-Benz Forum

TNX
Holger

vstech · #2 10-21-2014, 07:46 AM

If nobody gets this answered for you, I'll take a picture of the bolt arrangement tonight