|
|
|
|
|
#1
11-07-2014, 08:03 AM
|
|||
|
|||
Seat stuck flat WTB.switch
I need help with how to get my seat back in upright position. My son reclined the passenger seat all the back while we were on a long road trip, now the seat will not come up.
This seat has had issues before with the switch sticking " ONLY" with the reclining position. So after trying to get the switch to work I pulled the panel and switch and then I took the switch part and lost some of the ball bearings.  So I need a switch if some has one PLEASE PM ME Meantime any suggestions? Thx, greazer2b 
|
|
#2
11-07-2014, 10:04 AM
|
||||
|
||||
|
Need model and year, the switches are different across the years.
Some models do direct switching of motor current Some have individual low level switching of each point to the memory box Some have multiplex resistors and only a few wires to the controller
__________________
The OM 642/722.9 powered family Still going strong 2014 ML350 Bluetec (wife's DD) 2013 E350 Bluetec (my DD) both my kids cars went to junkyard in 2023 2008 ML320 CDI (Older son’s DD) fatal transmission failure, water soaked/fried rear SAM, numerous other issues, just too far gone to save (165k miles) 2008 E320 Bluetec (Younger son's DD) injector failed open and diluted oil with diesel, spun main bearings (240k miles) 1998 E300DT sold to TimFreeh 1987 300TD sold to vstech
|
 |
| Bookmarks |
|
|
Linear Mode
