|
|
|
|
|
#1
12-22-2014, 10:56 PM
|
|||
|
|||
|
Guidance Needed With Regard to OM603 Injector Line Clips
Shopped via the Pelican site and found some clips but didn't know which ones I needed. I need to replace all the clips. I can see the clips I need that are made for holding two lines but I can't seem to figure out which of the clips are for holding three lines. Am I making any sense? 1991 350 SDL
|
|
#3
12-22-2014, 11:43 PM
|
|||
|
|||
|
Same results
Thanks! It's not that I can't pull up the parts but rather that the online catalog is not clear. It pictures a clip that holds two. I need two of those BUT, there's also a picture of a clip that holds three but I don't get how it will work in the OEM clip holder that attaches to the intake? It looks nothing like the OEM clip. Another clip is offered but there is no picture. I'm pretty confident of the two line clips but I'm fuzzy on the three line clip. If someone knows the part number for the three line clip then that would be great info. Thanks!
|
|
#5
12-23-2014, 12:29 AM
|
|||
|
|||
|
See post 7 of this thread:
http://www.peachparts.com/shopforum/diesel-discussion/252894-failed-injector-hard-line-w124-300d-2-5turbo-pics.html
__________________
1968 220D, w115, /8, OM615, Automatic transmission. My 1987 300TD wagon was sold and my 2003 W210 E320 wagon was totaled (sheds tear).
|
|
#6
12-23-2014, 12:29 AM
|
|||
|
|||
|
Rog-o beat me by a minute. Drat!
__________________
1968 220D, w115, /8, OM615, Automatic transmission. My 1987 300TD wagon was sold and my 2003 W210 E320 wagon was totaled (sheds tear).
|
|
#8
12-23-2014, 12:41 AM
|
||||
|
||||
|
Jay_bob has a thread detailing the placement, orientation, and parts for the 603. We had a lot of fun getting them all in on his wagon.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!!  1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!
|
|
#9
12-23-2014, 01:15 AM
|
|||
|
|||
|
VSTech, do you happen to have a link to Jay_bob's thread? As I am working on my 603, his thread sounds like a great reference/read!
__________________
1987 300 TD - Kraut 1987 300 D - Hans
|
|
#10
12-23-2014, 07:58 AM
|
||||
|
||||
|
Here you go:
http://www.peachparts.com/shopforum/diesel-discussion/337398-help-locating-60x-rubber-mounts-hard-fuel-lines.html www.peachparts.com/shopforum/diesel-discussion/326478-glow-plugs.html
__________________
The OM 642/722.9 powered family Still going strong 2014 ML350 Bluetec (wife's DD) 2013 E350 Bluetec (my DD) both my kids cars went to junkyard in 2023 2008 ML320 CDI (Older son’s DD) fatal transmission failure, water soaked/fried rear SAM, numerous other issues, just too far gone to save (165k miles) 2008 E320 Bluetec (Younger son's DD) injector failed open and diluted oil with diesel, spun main bearings (240k miles) 1998 E300DT sold to TimFreeh 1987 300TD sold to vstech
|
|
#11
12-23-2014, 09:05 AM
|
||||
|
||||
|
Quote:
I added the link to the sticky thread!
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!
|
 |
| Bookmarks |
|
|
Linear Mode
