|
|
|
#1
|
|||
|
|||
96 E300d sputters won't start
Hi Guys Again I replaced the wire harness,sov, o-rings ,K-40 sensor. Now I cant get the car to start.I can see Fuel in the hoses I unscrewed the 1st fuel tube going into the into the 1st injector no fuel squirting out of the IP. What do I need to do? The car hasnt run for a month and battery been out of the car . Thanks Greg
|
#2
|
|||
|
|||
96 e300d wont start
Hi Guys I forgot to mention I replaced the the delivery pressure valve seals and o-rings. Thanks Greg
|
#3
|
||||
|
||||
you will need to loosen lines at injectos, crank engine over, stop, let starter cool and do it again. You may run the battery down at least once. Once fuel starts coming out at injectors snug em down and it should start. It is not going to start until you have fuel at injectors.
__________________
Jim |
#4
|
|||
|
|||
Double check that you got the fuel lines reinstalled correctly, especially #3 & 4. You wouldn't be the first to reconnect them incorrectly.
fuelflow.JPG (image)
__________________
Terry Allison N. Calif. & Boca Chica, Panama 09' E320 Bluetec 77k (USA) 09' Hyundai Santa Fe Diesel 48k (S.A.) |
Bookmarks |
|
|