|
|
|
#1
|
|||
|
|||
unusual sanden setup
I brought home an 83 grey market 240 in March and was pretty excited to see that it already had a sanden ac compressor hooked up, even thought ac was non operable.
Yesterday I was less impressed to see that the compressor mounting bracket is actually broken and I had to remove the compressor because it was starting to hang precariously. This is not a mounting kit i have seen before. It is cast aluminum with part numbers that do not appear to be MB. It also has a spring loaded idler to hold belt tension. Can anyone tell me where this thing came from? Also, from the pics you can tell it has issues. I think I can get it repaired, but on the off chance that anyone recognizes this kit I'd entertain buying the piece that is broken if anyone knows where I can get it. I also posted the part number for the compressor itself. Id appreciate any info available. I searched but didn't find anything about anything other than the kits from rollguy and klimacool. Thanks
__________________
1985 300 TD 448K 1984 300 TD 278K 1983 240D euro 240k 1994 f-250 idi turbo 330K 1986 f-350 IDI 1987 F-350 IDI 1985 JD 1050 4wd 1965 IH 3660 Last edited by shadetreemechan; 05-11-2015 at 10:15 PM. Reason: pictures upside down |
#2
|
||||
|
||||
It looks like the kit on my 240D euro... Want it?
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#3
|
|||
|
|||
PM sent
__________________
1985 300 TD 448K 1984 300 TD 278K 1983 240D euro 240k 1994 f-250 idi turbo 330K 1986 f-350 IDI 1987 F-350 IDI 1985 JD 1050 4wd 1965 IH 3660 |
#4
|
|||
|
|||
Vstech,
How about a bunch of really good pictures of yours with it still IN PLACE ? and some good measurements of the critical measurements..... like between bolt holes, etc... I think an idler pulley is a great design....
__________________
1980 240d , chain elongation, cam marks reference: http://www.peachparts.com/shopforum/showthread.php?threadid=10414 http://www.peachparts.com/shopforum/diesel-discussion/305365-9-degrees-chain-stretch.html evap fin cleaning: http://www.peachparts.com/shopforum/showthread.php?t=156207&highlight=evaporator A/C thread http://www.peachparts.com/shopforum/diesel-discussion/297462-c-recommendations-mb-vehicles.html |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|