|
|
|
#1
|
||||
|
||||
OM606 Turbo Oil Supply Line - What Size/Type of Fitting?
Has anyone ever determined the size and type of fitting in the block for the oil supply line?
To me it looks like an inverted flare or bubble brake line fitting. The size is probably 15mm. Thanks for any insight.
__________________
-Evan Benz Fleet: 1968 UNIMOG 404.114 1998 E300 2008 E63 Non-Benz Fleet: 1992 Aerostar 1993 MR2 2000 F250 |
#2
|
||||
|
||||
Check the old line closely.
On the 617.952s there is a restriction in the Oil Supply Line that has a 2mm ID. I don't know it its the same on your Engine. This is all the info I have on that from My notes: Restricted Fitting for the Turbo Charger + 2mm 2mm, as close to the turbo as possible (ForcedInduction) Is the original Oil Supply Line gone or is it just leaking? If it is leaking where is it leaking?
__________________
84 300D, 82 Volvo 244Gl Diesel |
#3
|
||||
|
||||
I'm just trying to find out the fitting size. I'm installing a different turbo and I need to make a new supply line.
I'll take a picture this evening so you have a better idea.
__________________
-Evan Benz Fleet: 1968 UNIMOG 404.114 1998 E300 2008 E63 Non-Benz Fleet: 1992 Aerostar 1993 MR2 2000 F250 |
#4
|
||||
|
||||
OK, here's a shot of the connector. The thread diameter is at least 16mm and the flared end of the tube is a double with the end being convex rather than a traditional concave flare.
__________________
-Evan Benz Fleet: 1968 UNIMOG 404.114 1998 E300 2008 E63 Non-Benz Fleet: 1992 Aerostar 1993 MR2 2000 F250 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|