My ****ing Fast 300 Turbo Diesel No Joke!!!!!!! - PeachParts Mercedes-Benz Forum

#1 05-08-2002, 10:28 AM

hi guys im new in this forum so i will tell firsst about my car
its an
300 turbo diesel from the W124 serie

i have reached the high end with this car
that means ihave 383horse power with 383nm

topspeed 293km/h and 4,3sec for 0-60m/ph

the engine has all mods u can imagine the chassis is the same like the 500E brakes like the 500E but not exactly the same mine are BROMBO racing brakes

exhaust not a remus but a G-power with a racing pipe
wheels: MoMo Ferrari engineering
tires Marshall Power Racer 235/45ZR/17
i have driven 230 000 km with this car much???????
its made in the year 1989 but it looks very new like a car from 1995 or something last week i raced a subaru impreza 555 he tought he can beat me but he was wrong puahahaha

#2 05-08-2002, 12:00 PM

if i say that only the exhaust delivers 15 hp and that the engine not an 3,0 but a 4,0 V8 is is that enough?????
and that the chip tuning delivers 50 horsepower and that i have made the cylinderheads more widther then they are is that enough????????1

only the chip and exhaust is 65hp and the engine had already something like 240horse power so i tuned it up and i had so much power

gnolo · #3 05-08-2002, 12:39 PM

No, I don't think it's CDI engine because 300D TURBO said previously that the torque of his car is 383 Nm and when original, the V8 CDI already delivers something like 580 Nm.

#4 05-08-2002, 12:56 PM

yes man u r right i typed it wrong

gnolo · #5 05-08-2002, 01:26 PM

what kind of engine do you have exactly ?
Is it still a diesel engine or it has been replaced by a gasoline engine ?

#6 05-08-2002, 03:04 PM

its still a diesel engine

#7 05-08-2002, 03:05 PM

a diesel engine 4,0 liter not an cdi engine man i dont know exactly but its a mercedes engine with 32 valve

Fathead · #8 05-08-2002, 10:51 PM

A Powershot 2000 system on this car would probably blow the heads off and snap the rear axles, but it sure would be interesting...

As if you need 40% more torque...

http://www.diesel************************/home.html

RG5384 · #9 05-08-2002, 11:12 PM

Quote:

Originally posted by TXBill
Sounds like they got some REAL good sticky-icky over there in Holland....

LMAO!!! HAHAHAHAHAHAHAHAHAHAAHAHAHAHHA, i can now go to bed laughing.....

BTW, if you dont mind telling us, how much did you spend on this "conversion", was it less than a 500e woulda cost ya? lol
Ryan

#10 05-08-2002, 11:13 PM

You did all these mods, and you don't even know what type of mercedes diesel V8 you have?

I am under the impression the only 4.0L modern Mercedes diesel V8 is the engine in the S400 CDI.

RG5384 · #11 05-09-2002, 06:48 AM

i may have to put my 300SD into the "shop" to make it a 600se cdi!!
R

#12 05-09-2002, 06:50 AM

stupid ******** if u dont believe me shut **** up than i respect all mercedes drivers but if u talk so like that against me go to **** than ******

*****Can't be cursing people on MercedesShop. You can certainly argue and disagree with people on the forum, but you must refrain from foul language and vugarity. Any further posting of foul language will result in your IP address being blocked.*****

84300DT · #13 05-09-2002, 08:24 AM

that the internet is clogged with people like this....
this is a friendly and positive board.

sorry just had to speak up.
that's all from me - bibi

DieselHead · #14 05-09-2002, 10:45 AM

300D Turbo,
It's not that we don't believe you, it's that we're inclined not to believe you. You say things though that contradict yourself and you are unwilling to elaborate on your wonderful car (I'm giving you the benefit of the doubt). It's almost as if you are implicating yourself. Anyway, let me tell you, this past weekend I was finally able to fit that jet engine in my W123. Took a while, some minor modification, but after a few cuts and bruises, it's in. Son of a ***** has some amazing pick up AND burns diesel AND gets about 35 MPG. Ask me about it.

Alex

HGV · #15 05-09-2002, 02:27 PM

Dieselhead,

What a ***** coincidence, this last %&^$# weakend I took the engine out of a CAT 633e Scaper and put it in my **** 87 300TD. My **** wife got tired of driving the ***** CAT to the store as it is a ****** to park. I took the ***** motor out and installed it in the wagon area. After I did all the **** hook-ups, I now have a ****ing Fast 87 300TD with a cat engine installed. Realy quick of the line but lacks ***** top end speed. It is also ****ing loud. Take a look at the ****CAT I took apart. Mine gets about 35gph. I will have to install and aux fuel tank to fuel the beast.

**** Henry