|
|
|
#1
|
|||
|
|||
What wheels will fit?
Hey guys - new to the site
Any ideas on what wheel will fit on W123 ? Looking for a better look for the old girl. |
#2
|
||||
|
||||
Which style do you currently have?
|
#3
|
||||
|
||||
W126 and w123 wheels interchangeable. ..
Most anything else... no. Some over 17" wheels will fit with a thin sidewall tire. There are others, but you need an offset less than 30... 24 I think...
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#4
|
||||
|
||||
I haven't seen any aftermarket wheel that looks better on a W123 than the standard steel wheel with hubcap or the aluminum bundt style alloys.
Not saying there isn't a better looking wheel out there, I just haven't seen one. One thing I'd love to see is a polished version of the light alloy wheels that look like steel wheels (123 400 13 02 or 123 400 15 02). That would be unique! |
#5
|
|||
|
|||
Has the steel on it now. Just picked her up and trying to restore.
Looking to maybe get some take offs from CList. Let me know your thoughts - sorry guys have to take off earlier then I antisapated. Take later. Sorry. |
#6
|
||||
|
||||
Doing a Google Image Search for "W123 wheels" turns up a decent amount of results for you to look through... see if you see something you like
https://www.google.com/search?q=w123+wheels&espv=2&biw=1305&bih=683&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwj3_vTd8ZbLAhUBNhQKHdaGB0gQsAQIGw
__________________
"Senior Luna, your sense of humor is still loco... but we love it, anyway." -rickymay ____ "Your sense of humor is still loco... " -MBeige ____ "Señor Luna, your sense of humor is quite järjetön" -Delibes 1982 300SD -- 211k, Texas car, tranny issues ____ 1979 240D 4-speed 234k -- turbo and tuned IP, third world taxi hot rod 2 Samuel 12:13: "David said to Nathan, “I have sinned against the Lord.” And Nathan said to David, “The Lord also has put away your sin; you shall not die." |
#7
|
||||
|
||||
Also, BenzWorld has a really nice thread going... 11 pages of W123 wheels. W123 Rims What works? - Mercedes-Benz Forum
These are my favorite aftermarket wheels. Centra made them, forget what they are specifically called:
__________________
"Senior Luna, your sense of humor is still loco... but we love it, anyway." -rickymay ____ "Your sense of humor is still loco... " -MBeige ____ "Señor Luna, your sense of humor is quite järjetön" -Delibes 1982 300SD -- 211k, Texas car, tranny issues ____ 1979 240D 4-speed 234k -- turbo and tuned IP, third world taxi hot rod 2 Samuel 12:13: "David said to Nathan, “I have sinned against the Lord.” And Nathan said to David, “The Lord also has put away your sin; you shall not die." |
#8
|
||||
|
||||
I'm running 16x8 ET11 AMG light alloy wheels. They're known to most as "AMG Pentas". I run 225 50 R16 tires on all 4, as well as 20mm H&R spacers in the rear. My fenders are rolled, and I have H&R springs.
Prior I ran enkei 92 in 16x7 ET30. Prior to that would be 17x8F 17x9R Privat Remembers. 16x7 ET37 forged CLK's 14x5.5 aluminum steelies. Moral of the story is that there are plenty off options. Just watch out on the offset up front. You want to keep it between about ET 15-30mm. Anything 17 or bigger rides like trash in my opinion. I find 16 inch wheels to be the perfect median.
__________________
1981 300TD 4 speed manual Euro bumpers, zender valance and skirts, H&R springs, billy HD's, leveled sls, real AMG Pentas 16x8 et11, vdo boost/egt gauges intergrated into ash tray, eurolights, led 3rd brake light |
#9
|
||||
|
||||
As I recall, the wheels with the hubcaps are aluminum as well.
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K |
#10
|
|||
|
|||
Mike do the 16 CLK's fit without spacers?
|
#11
|
||||
|
||||
You can run CLK wheels without spacers, but the front center caps won't fit over the wheel bearing dust caps. If running no spacers, you must use steel wheel lugs.
|
#12
|
||||
|
||||
It depends on the wheel. Completely black hubcap-style wheels are steel, ones with dashed white lines are 5.5" aluminum wheels, and ones with solid white lines are 6" wide aluminum.
Most hubcap-equipped cars have steel wheels. The 5.5" aluminum wheels are uncommon and somewhat expensive ($400-$500 a set on eBay), and the 6" ones are kind of a holy grail. Here is a picture of the 5.5" aluminum wheels:
__________________
"Senior Luna, your sense of humor is still loco... but we love it, anyway." -rickymay ____ "Your sense of humor is still loco... " -MBeige ____ "Señor Luna, your sense of humor is quite järjetön" -Delibes 1982 300SD -- 211k, Texas car, tranny issues ____ 1979 240D 4-speed 234k -- turbo and tuned IP, third world taxi hot rod 2 Samuel 12:13: "David said to Nathan, “I have sinned against the Lord.” And Nathan said to David, “The Lord also has put away your sin; you shall not die." |
#13
|
||||
|
||||
Wow. Mike's car with the hubcaps and lowered ride height looks incredible. Well done.
|
#14
|
|||
|
|||
Found some w126 wheels - I think they fit.
|
#15
|
|||
|
|||
Here are a couple of relevant FSM links with information about which wheels came with these cars from the factory.
http://www.startekinfo.com/StarTek/outside/12265/disc_2/program/Chassis/40-100.pdf http://www.startekinfo.com/StarTek/outside/12265/disc_2/program/Chassis/40-102.pdf |
Bookmarks |
|
|