|
|
|
#1
|
||||
|
||||
axle reboot mandrel
Does anyone have the dimensions of the 116 589 15 15 00 installation/removal tool? Its what is used to install the spider onto the axle, and it has a shoulder so the spider only goes down to a certain depth. Of course I didn't measure mine before I took it off. Alternately, if someone has a second version 123/126 axle (the kind without the lock ring) laying around with the "can" removed, I'd appreciate the measurement from the end of the spider to the end of the axle.
|
#2
|
||||
|
||||
Quote:
(From this thread => http://www.peachparts.com/shopforum/diesel-discussion/314059-looking-part-goes-within-my-w123-300d-axle.html )
__________________
1992 W201 190E 1.8 171,000 km - Daily driver 1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone 1965 Land Rover Series 2a Station Wagon CIS recovery therapy! 1961 Volvo PV544 Bare metal rat rod-ish thing I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior Don't leave that there - I'll take it to bits! |
#3
|
||||
|
||||
I did make my versions of those tools but I can't find the PDFs of the drawings I made for the machine shop.
__________________
1992 W201 190E 1.8 171,000 km - Daily driver 1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone 1965 Land Rover Series 2a Station Wagon CIS recovery therapy! 1961 Volvo PV544 Bare metal rat rod-ish thing I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior Don't leave that there - I'll take it to bits! |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|