|
|
|
#1
|
|||
|
|||
evaporator seals
Im pulling out the dash on mt 85 300d to replace the vacuum pods and was wondering if the ac evaporator uses oring seals. I have to repair or replace the r4 compressor due to an oil leak so im not concerned with evacuating the system. I just want to replace the seals if they exist so I dont have to pull the dash again if they start to leak at some point.
|
#2
|
|||
|
|||
Yep. Four o rings at the TXV (the aluminum block behind the glovebox)
__________________
'85 300D - federal spec, built in late 84. 85 300D Complete AC System Rebuild |
#3
|
|||
|
|||
thanks, if they are behind the glove box does that mean they can be changed with the dash in place?
|
#4
|
|||
|
|||
Yep. Pull glovebox and the passenger side kick panel. Its a good idea to flush the entire system while you are replacing the compressor, so you can add the proper amount of oil. Theres a ton of threads about what needs to be done on this forum.
__________________
'85 300D - federal spec, built in late 84. 85 300D Complete AC System Rebuild |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|