Looking for torque specs for the 2 allen bolts that secure the starter to the engine.

I have the starter back into place with loose bolts. Can's seem to find anything on the FSM.

These bolts were on pretty tight

Any info is greatly appreciated

Guten tight.

__________________
1978 300D, 373,000km 617.912, 711.113 5 speed, 7.5mm superpump, HX30W turbo...many, many years in the making....
1977 280> 300D - 500,000km+ (to be sold...)
1984 240TD>300TD 121,000 miles, *gone*
1977 250 parts car
1988 Toyota Corona 2.0D *gone*
1975 FJ45>HJ45
1981 200>240D (to be sold...)
1999 Hyundai Lantra 1.6 *gone*
1980s Lansing Bagnall FOER 5.2 Forklift (the Mk2 engine hoist)
2001 Holden Rodeo 4JB1T 2WD

For an 81 W126 300SD the FSM states 55 Nm for the torque values for the two starter bolts.
Couldn't find the values in the W116 FSM nor the W123 FSM.
I believe the Om617As in the W116, W123 and W126 cars use the same starter.
55 Nm (40.5 foot pounds) sounds about right.

__________________
78 W116 300SD 'Desert Rose' new as of 01/26/2014
79 W116 300SD 'Stormcloud' RIP 04/11/2022

thanks