|
|
|
#1
|
|||
|
|||
w123 low beams & fogs stopped working at same time
low beams & fogs stopped working on my w123. turn signals work. brights flash but will not stay on when the stalk is pushed toward the windshield. headlights are the original sealed beams.
I replaced all the fuses less than a year ago. I had some random spares that came with the car and put those in to 11 & 13 with no success. I spun all the fuses. I bought a new headlight, no success. I tried sanding one of the headlights prongs and sockets with no success. I bought an alt. brand combo switch thinking that it might be the problem. I put it in today with no luck. Stalk pushed toward windshield still doesn't turn high beams on. Only flash works. I have not bought a meter yet to check the voltages. And I have not yet replaced all the fuses again. Research suggests that's what I should have done at the start. I am a super novice mechanically & electrically. please advise. |
#2
|
|||
|
|||
Hello and welcome to the forum! I've attached a link to one of our DIY tech articles below - it may be useful in troubleshooting and resolving your light issue. Best of luck!
Mercedes-Benz W123 Headlight and Fog Light Replacement | 300TD 1977-1985 | Pelican Parts DIY Maintenance Article -Dmitry |
Bookmarks |
|
|