|
|
|
#1
|
||||
|
||||
1986 and up Bendix caliper rebuild Kit?
I've looked all over and can't find one for my 300SDL.
Is my only choice to swap calipers such as ATE or Genuine Mercedes? That's way too much money for something that could just use a rebuild.
__________________
1998 Ford Escort ZX2 5 speed - 279,000 miles My Daily 1992 Mercedes 300D 2.5 202,000 - Pure junk 2000 Mercedes E320 Black - 136,000 miles - Needs repair Don't forget to grease the screw and threads on the spring compressor. |
#2
|
||||
|
||||
They have them HERE on Pelican
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) |
#3
|
||||
|
||||
And they are priced from $8 to $111 for exactly the same parts? I do not get it.
|
#4
|
||||
|
||||
[QUOTE=TX76513;3723224]They have them HERE on Pelican[/QUOTE]
Where? I literally don't see any BENDIX caliper rebuild kits. If you can physically screen shot a BENDIX Caliper Rebuild kit I'll believe you. I'm serious right now because my rotors are ravaged.
__________________
1998 Ford Escort ZX2 5 speed - 279,000 miles My Daily 1992 Mercedes 300D 2.5 202,000 - Pure junk 2000 Mercedes E320 Black - 136,000 miles - Needs repair Don't forget to grease the screw and threads on the spring compressor. |
#5
|
||||
|
||||
I seriously don't think anyone carries them.
__________________
1998 Ford Escort ZX2 5 speed - 279,000 miles My Daily 1992 Mercedes 300D 2.5 202,000 - Pure junk 2000 Mercedes E320 Black - 136,000 miles - Needs repair Don't forget to grease the screw and threads on the spring compressor. |
#6
|
||||
|
||||
My guess is that these fit both Bendix and ATE. Why not give Pelican a call and ask them?
Folks rebuild them all the time; look at the large number of threads. |
#7
|
||||
|
||||
Quote:
I literally don't see any BENDIX caliper rebuild kits. If you can physically screen shot a BENDIX Caliper Rebuild kit I'll believe you. I'm serious right now because my rotors are ravaged.[/QUOTE] Are you needing the rebuild kit for 1264200783 calipers? Then the OEM kit on at that link
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) |
#8
|
||||
|
||||
Quote:
http://www.peachparts.com/shopforum/diesel-discussion/385993-auto-parts-store-calipers-one-problem-after-another.html This thread never left my mind. And still raises questions today with fitment
__________________
1998 Ford Escort ZX2 5 speed - 279,000 miles My Daily 1992 Mercedes 300D 2.5 202,000 - Pure junk 2000 Mercedes E320 Black - 136,000 miles - Needs repair Don't forget to grease the screw and threads on the spring compressor. |
#9
|
||||
|
||||
Just call Pelican. Then you will know.
I know that thread; it is one of probably several hundred and I do not remember anyone else bringing up this problem. I have an '81 300SD and I bought new calipers from Pep Boys; not expensive at all. Not sure for yours. Took maybe thirty minutes to install per wheel. |
#10
|
||||
|
||||
I found a brand called Centric that claims their caliper repair kit fits ATE/Bendix calipers for the 86-91 W126 chassis.
Part number is 143.35011 for Hard Boot Part number is 143.35012 for Soft Boot Only caveat is that it apparently fits both ATE and Bendix and not just a single brand. But since I have been scouring the internet for a couple hours.....this is the ONLY repair kit I could find that claims it has Bendix compatibility. I feel like I might as well give it a shot. My question is what is the difference between the Soft and Hard Boot? What would an 86' 300SDL have? How can I check? The tunnel to a front brake overhaul is beginning to see the light.
__________________
1998 Ford Escort ZX2 5 speed - 279,000 miles My Daily 1992 Mercedes 300D 2.5 202,000 - Pure junk 2000 Mercedes E320 Black - 136,000 miles - Needs repair Don't forget to grease the screw and threads on the spring compressor. Last edited by Father Of Giants; 07-06-2017 at 09:39 PM. |
#11
|
||||
|
||||
You can look up the part Centric part number and search with that.
https://centricparts.centriccatalog.com/EcatMain.aspx?id=ANR&uid=ANR&sid=0 When I look at that attched pic on the list it has bendix caliper kit with hard or soft boots. Has anyone encountered one with hard boots?
__________________
84 300D, 82 Volvo 244Gl Diesel |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|