|
|
|
#1
|
|||
|
|||
OM602 ALDA o ring size
I believe that my alda has started leaking. I am getting the black oil and i seem to be down on power. I saw a youtube video by dieselken. He says it is 10mmx2.5mm is that an OD of 10mm and 2.5 width? I found several combinations on mcmaster carr.
|
#2
|
|||
|
|||
Hello - if our members are not able to comment on this, please feel free to give us a call at 888-280-7799 and one of our MB part specialists will be happy to get you sorted. Best of luck!
|
#3
|
||||
|
||||
pm me where to send you one.
i've got a bunch of extras from when i fixed mine...somewhere.
__________________
1991 300D |
#4
|
||||
|
||||
found em- headed your way!
__________________
1991 300D |
#5
|
|||
|
|||
Quote:
Thank you |
#6
|
||||
|
||||
the alda O-ring fairy
pm'ed
__________________
1991 300D |
#7
|
||||
|
||||
It's worth adding to this thread that a 52mmID x 2.5mm O-ring is a good replacement for the outside seal. The original ALDA on my SDL didn't hold pressure at all. Leaked at the 2 halves and out the shaft seal. The outside seal that seals the 2 halves together was rock hard and shattered when touched. New O-ring did the trick. If taking the ALDA apart to replace the shaft seal, it seems to be a wise idea to replace the large O-ring at the same time.
__________________
Current stable: 1995 E320 149K (Nancy) 1983 500SL 120K (SLoL) Black Sheep: 1985 524TD 167K (TotalDumpster™) Gone but not forgotten: 1986 300SDL (RIP) 1991 350SD 1991 560SEL 1990 560SEL 1986 500SEL Euro (Rusted to nothing at 47K!) |
Bookmarks |
|
|