PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Diesel Discussion (http://www.peachparts.com/shopforum/forumdisplay.php?f=15)
-   -   Looking for Jack Stands? Check These Out! (http://www.peachparts.com/shopforum/showthread.php?t=388001)

Dmitry at Pelican Parts 08-17-2017 04:22 PM

Looking for Jack Stands? Check These Out!
 


With Summer winding down, many enthusiasts are already starting to plan their next projects for the Fall and the one 'tool' that's a must for every garage is a solid set of jack-stands. With a ton of options on the market and price points all over the place, the one question every car guy/gal ask themselves is, 'are these going to keep me and my car safe?' Us Pelicans want to make sure that the answer is always YES, so we always recommend the ESCO jack-stands when asked which option to go with. We trust them so much, that they were used when working on our Ferret Scout. Check out the picture below!


Available as a flat top lined with a hard, rubber cushion or your conventional, v-shaped post. Can’t decide which stand version you want or need? We now have additional axle posts available so that you can have the best of both worlds!


Click HERE to Check Them Out!


http://forums.pelicanparts.com/uploa...1503000624.jpghttp://forums.pelicanparts.com/uploa...1503000634.jpg

http://forums.pelicanparts.com/uploa...1503000770.jpg

tangofox007 08-17-2017 05:18 PM

Some pictures show one adjustment hole in the base and some show two. Which is it?
I presume that the purpose of the second hole is to increase the number of height adjustment options. One hole would only allow about 2 inch increments, which is a pretty big interval for a jack stand.

Dmitry at Pelican Parts 08-17-2017 06:34 PM

Quote:

Originally Posted by tangofox007 (Post 3739496)
Some pictures show one adjustment hole in the base and some show two. Which is it?
I presume that the purpose of the second hole is to increase the number of height adjustment options. One hole would only allow about 2 inch increments, which is a pretty big interval for a jack stand.



There are actually 5. I took a photo of the ones in our garage.

http://www.peachparts.com/shopforum/...1&d=1503009150

tangofox007 08-17-2017 09:09 PM

Quote:

Originally Posted by Dmitry at Pelican Parts (Post 3739529)
There are actually 5. I took a photo of the ones in our garage.

Apparently, you didn't understand the question.

This picture shows two adjustment holes in the base. (That would be the part with three legs.)

http://www.pelicanparts.com/catalog/ShopCart/TOOL/POR_TOOL_ESCOJS_pg1.htm

This picture appears to show only one hole.

http://www.pelicanparts.com/catalog/ShopCart/TOOL/POR_TOOL_ESCOJS_pg2.htm

If the holes in the base are spaced at half the distance of the holes in the post, the options for height selection would be doubled. And the adjustment interval would be cut in half.

jabstick420 08-17-2017 09:30 PM

the ones I got from here have one hole in the base.

good solid stands.


All times are GMT -4. The time now is 09:52 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website