![]() |
|
|
|
#1
|
||||
|
||||
1987 190D - driver seat options
Hey guys. Been fiddling with electrical stuff, slowly getting things sorted out in the car. One of the big annoyances I have is the driver's seat. The previous owner was rather generously proportioned, so several of the springs in the driver's seat are broken. The pad doesn't sit properly in the seat (compared to the passenger seat) either, but I haven't taken the whole seat out yet, as I'd like to continue driving the car while waiting on my new seat/seat parts to arrive.
What are my options for replacing the lower spring bit in my 190D?
__________________
2010 Mercedes E350 4Matic - 77k miles 1986.5 Nissan D21 V6 4x4 - 276k miles 1987 Mercedes 190D 2.5 Turbo - 3??k miles 1983 Mercedes 300SD turbo parts car 2017 Honda CBR500R - 15k miles 2016 Suzuki GSX S1000 - 9k miles ![]() |
#2
|
|||
|
|||
Swap in the base cushion from the passenger seat of a donor car. I did that and it works out very well.
__________________
Not MBZ nor A/C trained professional but a die-hard DIY and green engineer. Use the info at your own peril. Picked up 2 Infractions because of disagreements. NOW reversed. ![]() W124 Keyless remote, PM for details. http://www.peachparts.com/shopforum/mercedes-used-parts-sale-wanted/334620-fs-w124-chasis-keyless-remote-%2450-shipped.html 1 X 2006 CDI 1 x 87 300SDL 1 x 87 300D 1 x 87 300TDT wagon 1 x 83 300D 1 x 84 190D ( 5 sp ) - All R134 converted + keyless entry. |
#3
|
||||
|
||||
Problem is finding a donor... I have to order basically all my parts from somewhere. No yards around here keep anything older than the 2000s.
__________________
2010 Mercedes E350 4Matic - 77k miles 1986.5 Nissan D21 V6 4x4 - 276k miles 1987 Mercedes 190D 2.5 Turbo - 3??k miles 1983 Mercedes 300SD turbo parts car 2017 Honda CBR500R - 15k miles 2016 Suzuki GSX S1000 - 9k miles ![]() |
#4
|
||||
|
||||
Ebay or junkyard parts a base cushion and swap it in. I've used car-part.com with no troubles. The 201/124 seats come apart much more easy than the W123 seats, and ask for a passenger seat cushion, the driver's ones are generally beat. Over my sample of 3 W123's and 2 W201's I can say 5/5 were beat and broke. It's less graceful than the sag you can't get out of like an old volvo seat, it's like a broken spring poking you in the arse.
__________________
CC: NSA All things are burning, know this and be released. 82 Benz 240 D, Kuan Yin 12 Ford Escape 4wd You're four times It's hard to more likely to concentrate on have an accident two things when you're on at the same time. a cell phone. www.kiva.org It's not like there's anything wrong with feeling good, is there? |
#5
|
|||
|
|||
X2, this is the most economical route. The trick is to find a donor with same color interior. Look on the "For Sale" forum:
Mercedes Used Parts For Sale & Wanted - PeachParts Mercedes ShopForum
__________________
Respectfully, /s/ M. Dillon '87 124.193 (300TD) "White Whale", ~392k miles, 3.5l IP fitted '95 124.131 (E300) "Sapphire", 380k miles '73 Balboa 20 "Sanctification" Charleston SC |
#6
|
||||
|
||||
Thanks guys!
__________________
2010 Mercedes E350 4Matic - 77k miles 1986.5 Nissan D21 V6 4x4 - 276k miles 1987 Mercedes 190D 2.5 Turbo - 3??k miles 1983 Mercedes 300SD turbo parts car 2017 Honda CBR500R - 15k miles 2016 Suzuki GSX S1000 - 9k miles ![]() |
#7
|
||||
|
||||
If you have an interior color common with the facelift models, I'd personally go with the seats from a facelifted car (89 and newer IIRC). Much more comfortable and seem to have less wear issues.
__________________
Current: 1975 450SEL, 83 300D, 88 Yugo GVX, 90 300D OM603 swap, 91 F150 4.6 4v swap, 93 190E Sportline LE 3.0L M104 swap, 93 190E Sportline LE Megasquirt, 03 Sprinter, 06 E500 4Matic wagon. |
![]() |
Bookmarks |
|
|