Needing to change transmission fluid, what is the fluid capacity for both torque converter and pan?

Is it 11 quarts for both pan and torque converter?

Subscribed as I have to do this same job on same car soon .

__________________
-Nate
1982 240D 408,XXX miles
Ignorance is the mother of suspicion and fear is the father

I did then what I knew how to do ~ now that I know better I do better

Assuming it's a 722.3, draining the pan and torque converter will take somewhere between 5 and 7 quarts to refill and adjust the level. The amount you refill depends on the amount that drained out, a quart or so will stay in the transmission cooler and lines, and a bit more will stay in the valve body.

__________________
Current stable:
1995 E320 149K (Nancy)
1983 500SL 120K (SLoL)

Black Sheep:
1985 524TD 167K (TotalDumpster™)

Gone but not forgotten:
1986 300SDL (RIP)
1991 350SD
1991 560SEL
1990 560SEL
1986 500SEL Euro (Rusted to nothing at 47K!)

I believe two gallons will do it, including converter.

__________________
'82 300CD
"Pearl", the very first turbo diesel 123 coupe
Totaled 11/23/18, rebuild in progress.
'85 300TD, "Artemis".
'78 300D euro, "Ol' Red", mostly retired.
'85 300D, "Gandalf".

Thanx guys ! .

__________________
-Nate
1982 240D 408,XXX miles
Ignorance is the mother of suspicion and fear is the father

I did then what I knew how to do ~ now that I know better I do better

Best way to know is to check the level on the dipstick while warm if the kvel is correct and then carefully measure how much comes out of the pan and torque converter. MB specs 6.2 l or 6.6 qts.