PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Diesel Discussion (http://www.peachparts.com/shopforum/forumdisplay.php?f=15)
-   -   W123 manual transmission clutch wear limits (http://www.peachparts.com/shopforum/showthread.php?t=393475)

moon161 06-02-2018 04:15 PM
W123 manual transmission clutch wear limits
 
Does anyone know the new and replacement limit thicknesses of the clutch lining on the w123 manual transmission (iron box 4 spd)?

ah-kay 06-02-2018 04:56 PM
I don't have the numbers. Shouldn't they be the same? Just curious. Why you want to know? If the clutch slips then replace it. If you remove the tranny for whatever reasons then replace it. While you are in there syndrome! It is not something you can measure easily without a lot of work.

Frank Reiner 06-02-2018 05:24 PM
Quote:
Originally Posted by moon161 (Post 3817952)
Does anyone know the new and replacement limit thicknesses of the clutch lining on the w123 manual transmission (iron box 4 spd)?

Lining Thickness:
Pressure Plate side - 3.8mm
Flywheel side - 4.0mm


Total permissible wear - 2mm

moon161 06-04-2018 08:56 AM
Quote:
Originally Posted by ah-kay (Post 3817962)
I don't have the numbers. Shouldn't they be the same? Just curious. Why you want to know? If the clutch slips then replace it. If you remove the tranny for whatever reasons then replace it. While you are in there syndrome! It is not something you can measure easily without a lot of work.
Because it doesn't slip. It won't disengage. The clutch hydraulics have been replaced and bled, and the yoke and release bearing are in good shape. I'd be less inhibited with the money shovel if it was slipping but it isn't.

moon161 06-04-2018 08:56 AM
Quote:
Originally Posted by Frank Reiner (Post 3817969)
Lining Thickness:
Pressure Plate side - 3.8mm
Flywheel side - 4.0mm


Total permissible wear - 2mm

Thanks!

Steve_in_NV 06-12-2018 07:01 PM
This will resolve all your transmission troubles.

https://www.youtube.com/watch?v=Ac7G7xOG2Ag


All times are GMT -4. The time now is 12:14 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website