Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 02-21-2019, 08:35 PM
Registered User
 
Join Date: Nov 2006
Posts: 432
Garrett turbo on the bench. How to disassemble???

It doesn't make sense that you can't get some of the bolts off because as you turn them out, they hit other parts of the housing. Is there some secret here or a good video or instruction piece on disassembling these?

Reply With Quote
  #2  
Old 02-21-2019, 09:17 PM
W115 Addict
 
Join Date: Dec 2016
Location: Richland, WA
Posts: 86
************** sells a how-to vid on this.
Reply With Quote
  #3  
Old 02-21-2019, 09:17 PM
W115 Addict
 
Join Date: Dec 2016
Location: Richland, WA
Posts: 86
Dont know why it blocked it..mercedezsource -kent. Always good info
Reply With Quote
  #4  
Old 02-21-2019, 09:23 PM
Registered User
 
Join Date: Nov 2013
Location: San Mateo, CA
Posts: 1,120
If you loosen the bolts to the aluminum compressor housing, you can "clock", or rotate the housing to a different position.
This allows to remove the bolt(s) that would otherwise be blocked from removal.
__________________
78 W116 300SD 'Desert Rose' new as of 01/26/2014
79 W116 300SD 'Stormcloud' RIP 04/11/2022
Reply With Quote
  #5  
Old 02-21-2019, 10:18 PM
Diesel911's Avatar
Registered User
 
Join Date: Sep 2007
Location: Long Beach,CA
Posts: 51,036
After you loosen the bolts some you can tap the exhaust housing away some and that will give you room to loosen the bolts the rest of the way.

In order to rotate/clock the housing as suggested in the other the Exhaust housing has to be loose.
__________________
84 300D, 82 Volvo 244Gl Diesel
Reply With Quote
  #6  
Old 02-21-2019, 10:18 PM
Diesel911's Avatar
Registered User
 
Join Date: Sep 2007
Location: Long Beach,CA
Posts: 51,036
After you loosen the bolts as much as you can you can tap the exhaust housing away some and that will give you room to loosen the bolts the rest of the way.
__________________
84 300D, 82 Volvo 244Gl Diesel
Reply With Quote
  #7  
Old 02-21-2019, 11:36 PM
Registered User
 
Join Date: Nov 2006
Posts: 432
It's not tapping away. Tomorrow, I'll try clocking it over if that's possible..

how does the shaft come out? It's still in.
Reply With Quote
  #8  
Old 02-22-2019, 03:25 AM
Registered User
 
Join Date: May 2009
Location: The slums of Beverly Hills
Posts: 8,065
If you Google or YouTube search T3 turbo rebuild you'll find a million hits. MB T3s are in no way unique. It's probably the most common turbo in 80s OEs and aftermarket today.

__________________
CENSORED due to not family friendly words
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 02:32 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page