|
|
|
#1
|
|||
|
|||
Door adjustment
I was adjusting my door because it was drooping just slightly towards the B pillar which made it hard to close. After reading some stuff on the internet, I loosed the bolts on the frame of the car and tried adjusting the door. That was a bunch of problems.
I finally found this video online, but where would I get such tools? I would take the car to a body shop but they'll probably charge a lot. https://www.youtube.com/watch?v=cJWJcQoe9O8 Mine's a w124 four door. |
#2
|
|||
|
|||
Part of them looks like a trim tool kit, similar to this one: https://www.pelicanparts.com/catalog/shopcart/TOOL/POR_TOOL_KTTOOL_pg2.htm
|
#3
|
||||
|
||||
It’s pretty easy to do without tools and spacers. Just go slow. Have you verified from the fsm that the block isn’t a shop made tool?
__________________
Current Diesels: 1981 240D (73K) 1982 300CD (169k) 1985 190D (169k) 1991 350SD (113k) 1991 350SD (206k) 1991 300D (228k) 1993 300SD (291k) 1993 300D 2.5T (338k) 1996 Dodge Ram CTD (442k) 1996 Dodge Ram CTD (265k) Past Diesels: 1983 300D (228K) 1985 300D (233K) |
#4
|
|||
|
|||
I don't have a FSM
Even if I did, would it tell you how to adjust the doors?
|
#5
|
||||
|
||||
W123, but..
http://www.peachparts.com/shopforum/diesel-discussion/302352-coupe-door-alignment.html http://www.peachparts.com/shopforum/diesel-discussion/314303-w123-coupe-window-adjustment.html Fsm 72-195 for windows... don’t recall for door striker. But again for w123. That said, how different can they be? My door was slightly off, and the window stop was upside down... caused a lot of wasted time and frustration. But got all the guidance from the fsm...
__________________
Current Diesels: 1981 240D (73K) 1982 300CD (169k) 1985 190D (169k) 1991 350SD (113k) 1991 350SD (206k) 1991 300D (228k) 1993 300SD (291k) 1993 300D 2.5T (338k) 1996 Dodge Ram CTD (442k) 1996 Dodge Ram CTD (265k) Past Diesels: 1983 300D (228K) 1985 300D (233K) Last edited by JHZR2; 04-20-2019 at 07:32 AM. |
Bookmarks |
|
|