|
|
|
|
|
#1
11-20-2020, 07:51 PM
|
||||
|
||||
|
w124 Rearview mirror and bracket.
The rear view mirror in my car is broken. I came to me like that. When O removed the rear view, the bracket came out as well.
How do I re install the bracket? Thank!
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K 
|
|
#2
11-21-2020, 01:55 AM
|
||||
|
||||
|
You'll have to pry the bracket off the mirror and screw it back in place. If the threads are blown out then either use a larger sheet metal screw or a bolt with a washer and nut. Probably will have to hammer the metal back flat first for the mirror to sit flush if it pulled out.
|
|
#3
11-22-2020, 01:52 AM
|
||||
|
||||
|
I got it back it. Found a mirror on Feepay for 20 bucks. It looks like the PO's mechanic used smaller screws, as the actually broke when I pulled the mirror off.
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K
|
 |
| Bookmarks |
|
|
Linear Mode
