Hey so im converting my 300td to non sls springs and shocks. Ive never replaced springs or shocks on any w123 before. Ive read there are these little rubber spacers/bumpers/cushions on the top of springs where it meets the body. Ive also heard there are 4 different sizes.

I image I might be able to get away with re using the original ones that are currently on there but I would like to replace them. Does anybody know what these are officially called or the part number and/or what size is best. I would prefer ride height to be on the higher side of things but not super high. (This is for rear springs only)

https://www.amazon.com/gp/product/B006XXPVUW/ref=crt_ewc_title_huc_1?ie=UTF8&psc=1&smid=A2JO8M7CU4M3CX&tag=coa_us-20

Im converting to these w140 springs

And does anybody have the link to cheapo ebay mercedes spring compressor that works.

Thanks

__________________

really don't need them if you jack body high , place jackstands use jack to lower spring components down

__________________
1999 w140, quit voting to old, and to old to fight, a god damned veteran

Have you done this before with a wagon?

__________________