|
|
|
|
|
#1
11-30-2020, 03:51 AM
|
||||
|
||||
|
w124 Headlight wiper system
Guys,
I am looking to add the headlight wiper system to my car. it did not have that option installed. What parts do I need to do that, besides the wiper system and surround? Also, what kind of a PITA is that to do? Thanks!
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K 
|
|
#2
11-30-2020, 07:49 AM
|
||||
|
||||
|
From what I remember, you’ll need
The wiring harness to the motors The extra pump and all the tubing The washer jar has the place for the second pump but you’ll have to drill it out. The grommet was still available a couple years back. The motors don’t have any kind of control unit, the rule is (headlights on and windshield washer activated) then run the pump and cycle the wipers. They have the same park/run switch as regular wipers, except the switch is in one side only and the other just follows along. Btw the 126 uses the same motors, pump and nozzles (but a different trim strip). So you can look for 126s also for the mechanical parts.
__________________
The OM 642/722.9 powered family Still going strong 2014 ML350 Bluetec (wife's DD) 2013 E350 Bluetec (my DD) both my kids cars went to junkyard in 2023 2008 ML320 CDI (Older son’s DD) fatal transmission failure, water soaked/fried rear SAM, numerous other issues, just too far gone to save (165k miles) 2008 E320 Bluetec (Younger son's DD) injector failed open and diluted oil with diesel, spun main bearings (240k miles) 1998 E300DT sold to TimFreeh 1987 300TD sold to vstech
|
|
#3
11-30-2020, 04:30 PM
|
|||
|
|||
|
Quote:
Location: Oklahoma,he has what you are looking for up for sale in good condition Here’s his email bradwilliams5407@gmail.com Sent from my iPhone using Tapatalk
|
|
#4
12-01-2020, 08:14 AM
|
||||
|
||||
|
You will need to check the headlight assembly ,because the motor is held in to the bottom of the headlight case .
|
|
#5
12-02-2020, 12:32 AM
|
||||
|
||||
|
I am wanting to get Ecode lights also. Are the DEPO o es any good? I would prefer Bosch or Hella, but not for the $800 I am coming across.
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K
|
|
#6
03-16-2021, 12:23 AM
|
|||
|
|||
|
So I'm glad this post was recent.
Does anybody know where the harness runs to on the car? Does the driver side have more plugs and does the passenger side have more plugs and where does the harness end up running to in the car?
|
|
#7
03-17-2021, 05:46 AM
|
||||
|
||||
|
Quote:
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K
|
|
#8
03-17-2021, 07:10 PM
|
||||
|
||||
|
Quote:
__________________
Stable Mates: 1987 300TD 310K mi (Hans) 2008 Jeep Grand Cherokee OM642 165k mi (Benzrokee)
|
|
#9
03-18-2021, 01:19 AM
|
|||
|
|||
|
If I didnt want to get the harness from a junkyard that ties the headlights to the washer pumps (for the purpose of adding headlight wipers to my car that didnt come with them), is there a way to make the wipers and squirters come on with my own rocker switch on the dash and still have them come.to rest when I turn the switch off???
Any electronics guys here that can explain? Maybe a factory toggle switch that is spring loaded and you hold it up to make the wipers and squirters operate and when you let go they go back to rest?
|
 |
| Bookmarks |
|
|
Linear Mode
