OM606 Headgasket Replacement: Few Questions

[Ian White]

Hello.

I am gearing up to replace my headgasket due to weeping of coolant on the passenger side near cyl 6. I plant to replace the timing chain, guides and tensioner as well. Also plan to have the head sent to a machine shop to check valves etc.

I have recently serviced all injectors and replaced all 6 glowplugs & wiring harness.

Does anyone have the timing chain crimping tool?

Does anyone have the cam timing locks?

Does anyone have a good pictorial of this process (I have WDS and EPC, but more pics is better to review beforehand).

Thanks