Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-15-2021, 01:03 PM
INSIDIOUS's Avatar
Not suffering fools today
 
Join Date: Jan 2014
Location: Tartarus Dorsa Mountains
Posts: 30,340
OM603 Compared to the others

Thinking about picking up a local TDT wagon. What should I know about this engine? Thank you valued experts!

Reply With Quote
  #2  
Old 07-15-2021, 02:13 PM
moon161's Avatar
Formerly of Car Hell
 
Join Date: Mar 2008
Location: Buffalo NY
Posts: 2,057
From my experience with a NA 602 2.5:
1. Overheating a 60x motor is likely to crack the aluminum head.
2. Hydraulic lifters means no valves to adjust
3. Lots of little EGR vacuum lines.
4. Serpentine belt so with misaligned or worn idler pulleys, you can break a belt and lose cooling, see #1
5. Starts easy, pulls well when healthy, good MPG.

W124/201 plastic trim doesn't seem to age as well as W123 plastic trim. Don't be surprised if the plastic is extra brittle.
__________________
CC: NSA

All things are burning, know this and be released.

82 Benz 240 D, Kuan Yin
12 Ford Escape 4wd

You're four times
It's hard to
more likely to
concentrate on
have an accident
two things
when you're on
at the same time.
a cell phone.


www.kiva.org It's not like there's anything wrong with feeling good, is there?
Reply With Quote
  #3  
Old 07-15-2021, 03:24 PM
INSIDIOUS's Avatar
Not suffering fools today
 
Join Date: Jan 2014
Location: Tartarus Dorsa Mountains
Posts: 30,340
Thank you. Carry a spare belt and the tools to put in on, and a diagram!
Reply With Quote
  #4  
Old 07-16-2021, 04:08 AM
Registered User
 
Join Date: Feb 2013
Posts: 704
Quote:
Originally Posted by INSIDIOUS View Post
Thank you. Carry a spare belt and the tools to put in on, and a diagram!

Just replace the idler pulley, spring, shock absorber, pivot, etc with factory parts and it will be fine. You can change the vacuum pump at the same time too, which also needs to be done, and put an om606 fan and fan clutch in.
Reply With Quote
  #5  
Old 07-16-2021, 09:03 AM
INSIDIOUS's Avatar
Not suffering fools today
 
Join Date: Jan 2014
Location: Tartarus Dorsa Mountains
Posts: 30,340
Quote:
Originally Posted by 83w126 View Post
Just replace the idler pulley, spring, shock absorber, pivot, etc with factory parts and it will be fine. You can change the vacuum pump at the same time too, which also needs to be done, and put an om606 fan and fan clutch in.
What is the test to see if those belt parts need replacing?
Reply With Quote
  #6  
Old 07-16-2021, 09:50 AM
Registered User
 
Join Date: Aug 2019
Posts: 949
Quote:
Originally Posted by INSIDIOUS View Post
What is the test to see if those belt parts need replacing?
Take the belt off and check each pulley for play and then rotate it and listen for abnormal noises.

Installing a one way alternator pulley helps if you have belt tensioner vibration.
Reply With Quote
  #7  
Old 07-16-2021, 10:49 AM
777funk's Avatar
Registered User
 
Join Date: Dec 2006
Posts: 1,031
I had one in an 87 300d for a few years. I spent $1500+ in preventative maintenance (including the upgraded vacuum pump with less risk to the timing chain). In retrospect, I would have just driven it and only replaced the bare necessities. I sold the car for $1500. It ran great all the time I had it. Very good engine IMO. Mine still had the #14 head (the one that can crack if overheated).
__________________
-E300d '99 350k
-Suburban '93 220k
-TDI Jetta '03 350k
Sold
-F250 '96 7.3
-Dodge Ram 12V
-E320 '95 200k
-E320 Wagon 1994 155k
-300d Turbo '87 187k miles
-E320 1994 200k
-300d Turbo '84 245k (sold to Dan62)
-300d Turbo '84 180k
-300sd '80 300k
-7.3 Powerstroke Diesel 15P Van 500k+ miles
-190d '89 Non Turbo 2.5 5cyl 240k (my first MB)
Tom's Imports of Columbia MO Ruined the IP in changing leaky delivery valve O-Rings - Refused to stand behind his work. Mid-MO MB drivers-AVOID Tom's.
Reply With Quote
  #8  
Old 07-16-2021, 01:42 PM
cmac2012's Avatar
Renaissances Dude
 
Join Date: Dec 2004
Location: Redwood City, CA
Posts: 33,911
I like the engine all in all, but one does need to pay close attention. Quicker and smoother than the OM617, better mpg, but perhaps more delicate.

I had no way of knowing of course, but in hindsight the preventive maintenance I really should’ve done was to replace the original radiator with the all aluminum aftermarket unit. The radiator will self-destruct eventually.
__________________
1986 300SDL, 362K
1984 300D, 138K
Reply With Quote
  #9  
Old 07-17-2021, 11:54 AM
Registered User
 
Join Date: Sep 2004
Location: Las Vegas, NV
Posts: 701
I've owned quite a few different non MB diesel engines - and two 603s. I like them very much. I like the power curve. Though I don't love the power curve with the auto gearbox so much. They are quiet and easy to work on. Predictable, if I may say. That idler pulley and spring and shock are failure points, but just replace them when they start to make noise. My complaint is that engine is long enough to make working on the front of it a pita. I've resorted to removing the radiator just to free up space and ultimately to save time. I am thinking about installing the all aluminum radiator. Here in southern Nevada the heat is a concern. My #14 head has almost 300k miles - so far so good.
__________________
DS
2010 CL550 - Heaven help me but it's beautiful
87 300D a labor of love
11 GLK 350 So far, so good
08 E350 4matic, Love it.
99 E320 too rusted, sold
87 260E Donated to Newgate School
www.Newgateschool.org - check it out.
12 Ford Escape, sold, forgotten
87 300D, sold, what a mistake
06 Passat 2.0T, PITA, sold

Las Vegas NV
Reply With Quote
  #10  
Old 07-19-2021, 09:50 AM
moon161's Avatar
Formerly of Car Hell
 
Join Date: Mar 2008
Location: Buffalo NY
Posts: 2,057
Yeah, that guy in Morrocco with the swapped 603 had length problems, I forget what it was swapped into, a W116 maybe?
__________________
CC: NSA

All things are burning, know this and be released.

82 Benz 240 D, Kuan Yin
12 Ford Escape 4wd

You're four times
It's hard to
more likely to
concentrate on
have an accident
two things
when you're on
at the same time.
a cell phone.


www.kiva.org It's not like there's anything wrong with feeling good, is there?
Reply With Quote
  #11  
Old 07-19-2021, 02:37 PM
INSIDIOUS's Avatar
Not suffering fools today
 
Join Date: Jan 2014
Location: Tartarus Dorsa Mountains
Posts: 30,340
Thanks guys. Funny thing. The belt snapped about 1/4 mile into the test drive U turn and right back to parking in the drive. Was very old belt, Car had sat for years. Owner didn't know what a serp belt was. Looks tight in there, can I put on the replacement without dropping the engine?
Reply With Quote
  #12  
Old 07-19-2021, 02:52 PM
Registered User
 
Join Date: Aug 2019
Posts: 949
Remove the fan with the shroud and you will get more room.
Reply With Quote
  #13  
Old 07-19-2021, 03:28 PM
777funk's Avatar
Registered User
 
Join Date: Dec 2006
Posts: 1,031
I'm going off years back on memory, but I don't think I removed fan or shroud to put a new belt on.
__________________
-E300d '99 350k
-Suburban '93 220k
-TDI Jetta '03 350k
Sold
-F250 '96 7.3
-Dodge Ram 12V
-E320 '95 200k
-E320 Wagon 1994 155k
-300d Turbo '87 187k miles
-E320 1994 200k
-300d Turbo '84 245k (sold to Dan62)
-300d Turbo '84 180k
-300sd '80 300k
-7.3 Powerstroke Diesel 15P Van 500k+ miles
-190d '89 Non Turbo 2.5 5cyl 240k (my first MB)
Tom's Imports of Columbia MO Ruined the IP in changing leaky delivery valve O-Rings - Refused to stand behind his work. Mid-MO MB drivers-AVOID Tom's.
Reply With Quote
  #14  
Old 07-19-2021, 04:30 PM
Registered User
 
Join Date: Nov 2018
Location: Dallas, TX
Posts: 395
I have om603 turbo with almost 250k miles as daily driver.
I like it, it's not fast, but it's just enough to live in a big city. It's fast compared to om617 for sure.

1. Take off valve cover and check timing, then check timing relative to injection pump. Check chain slack if any.
2. Turbo seals like to go bad and smoke, I replaced the whole turbo on the cheap and it's been fine.
3. EGR delete is a good thing to do.
4. Blowby...a little is ok. It likes to spit a bit of oil around turbo, that's normal.
5. Delivery valve seals, sooner or later, plus make sure the hard lines from IP to injectors have all their plastic holders. There's a lot of vibration and they are a must!
6. Other than that, as others mentioned, belt and belt tensioner is very common failure point.

Usually these engines are really good, I have the #14 head and no issues even when car got to 110 degrees.
Typically your transmission or axle shafts will go first rather than this engine

If you are getting this car, I highly recommend doing LiquiMoly Engine Flush right before first oil change.
Then, of course, Diesel Purge with all new filters, as you probably know It really makes a huge difference for city drivers
Reply With Quote
  #15  
Old 07-19-2021, 05:11 PM
INSIDIOUS's Avatar
Not suffering fools today
 
Join Date: Jan 2014
Location: Tartarus Dorsa Mountains
Posts: 30,340
Quote:
Originally Posted by filp View Post
I have om603 turbo with almost 250k miles as daily driver.
I like it, it's not fast, but it's just enough to live in a big city. It's fast compared to om617 for sure.

1. Take off valve cover and check timing, then check timing relative to injection pump. Check chain slack if any.
2. Turbo seals like to go bad and smoke, I replaced the whole turbo on the cheap and it's been fine.
3. EGR delete is a good thing to do.
4. Blowby...a little is ok. It likes to spit a bit of oil around turbo, that's normal.
5. Delivery valve seals, sooner or later, plus make sure the hard lines from IP to injectors have all their plastic holders. There's a lot of vibration and they are a must!
6. Other than that, as others mentioned, belt and belt tensioner is very common failure point.

Usually these engines are really good, I have the #14 head and no issues even when car got to 110 degrees.
Typically your transmission or axle shafts will go first rather than this engine

If you are getting this car, I highly recommend doing LiquiMoly Engine Flush right before first oil change.
Then, of course, Diesel Purge with all new filters, as you probably know It really makes a huge difference for city drivers
Thanks for that effort. Regards 2. Would that smoke be on start up or while at operating temp, all the time?

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 07:13 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page