|
|
|
#1
|
||||
|
||||
lower ball joints & what else
Hi All
I'm getting ready to order (from ole rusty)my lower ball joints. While I'm in there I think I should go for lower control arm bushing and the guide rod mount kit. Now for the guide rod mount is there one on either side ( i have not looked) and I should get 2. While I'm at it what else would it be easy to knock out while I'm under there having all this fun. Thanks A Lot I can hear your hearts racing as you ponder the answer (Klatta, Klatta, Klatta, Klatta, Klatta, Klatta)!
__________________
bznupe30 85 300d-t 97 legacy gt sw |
#2
|
||||
|
||||
There is a guide rod at each side.
Consider upper control arm bushings and sway bar bushings as well. Replacing the lower control arm bushings requires compressing and removing the springs. Are you geared up for that? Sixto 91 300SE 87 300SDL 83 300SD |
#3
|
|||
|
|||
I think you can get the whole upper control arms for $38/pair, so replace both of them.
Yes, you will need two guild rod mounts for a car. Michael
__________________
Michael McGuire 83 300d 01 vw A4 TDI 66 Chevy Corsa 68 GMC V6 w/oD 86 300E |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|