With respect to the 82 300D T being advertised on the classified's section of this site. The one with the B2 piston problem. What is the B2 piston? What is it's problem? And is this something I should be worried about when looking at an auto 123 or 126?

Sorry if this is a repeat of an old issue but I've not found reference to it elsewhere on the site.

- Peter.

the B2 piston is a part in the transmission(on the right side of trans).These have a tendency to go bad.When ours went bad the car would not move!as if it was in neutral.The part is approx. $100.The trans on a 123 needs to be pulled to replace this,but on a 126 the trans does not need to be pulled.It is a good preventative maintenance measure to replace this part if it has not been done before.

__________________
'60 190b
'77 300D
'78 240D
'82 300TD

I've sent three e-mails to the owner of the 300TD with the bad B2 valve. No responses.

__________________
Never a dull moment at Berry Hill Farm.

R Leo
I'm the owner of the 300TD wagon with the stuck B2 and have got NO e-mail from you
it's busfarmer@earthlink.net

__________________
thanks again DEAN

Enquiring minds want to know...

__________________
Never a dull moment at Berry Hill Farm.

R leo
your e-mail address you gave me keeps bouncing
try again or just call me (916)971-3609

__________________
thanks again DEAN