Level headed
 

I would like to ask another question about TD level ride suspension. Does anyone have a picture, graphic or crayon drawing of this hydraulic system?

Crawled under the old wagon and checked it out. No leaks, no spills, no nothing, except....I don't know what happened to the plastic or nylon piece that attaches the linkage to the bar. These two pieces seemed to be un attached. A overloading safety perhapse?

This is new to me and I need to see one that is functioning properly. Or at least a picture of it:D . Anybody have any suggestions?

T

Go here: http://www.peachparts.com/shopforum/showthread.php?threadid=74439

There's a drawing of the assembly a couple of posts down.

Thanks, I found the problem.....which leads to another problem. Where do I get the part from. It connects the top sway bar?:rolleyes: to the hight control valve. It is an expandable screw type rod that you can adjust the length. Apparently it fell off or was overloaded and broke off. Who knows, but at least I know the rest of the system works:) Any suggestions are always welcome.

T

Click on the "Fastlane" button at the top of this page. If you know what you need then you can order it online. If not, then you can call Phil. The phone number is on that page. Sales from Fastlane and PartsShop support this site.

Rick is right, that's available through Fastlane.

Suspension Pull Rod - Torsion Bar to Self-Levelling Unit
PN: L7005-73476

$27.90

Alternatively, you may be able to find one of these items in a boneyard.

Make sure and use locking nuts when installing the replacement; you don't want to loose the new one.

Leo, Rick, can't thank you enough I'm ordering as we speak!

T