PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Diesel Discussion (http://www.peachparts.com/shopforum/forumdisplay.php?f=15)
-   -   CV Boot swap DIY page done, finally. (http://www.peachparts.com/shopforum/showthread.php?t=79808)

BoostnBenz 11-17-2003 12:44 AM

CV Boot swap DIY page done, finally.
 
Well after a long time of "coming soon" I finally got this done as well as the html coding for the pictures on my site. I haven't reread the whole VFAQ yet but I'm thinking it should make sense, I wrote it a year ago and finally got around to adding the 30 pictures to the html today!

http://207.210.95.34/~boostd/CVboots

If people think it is a good idea I'll start taking my camera with me for all these jobs and eventually should have quite the site built up. Up until now I've only taken pictures of things that Thomaspin doesn't have but being his site is now subscription only I guess I'll be making a W123 page which is quite similiar, and free. ;)

The Warden 11-17-2003 01:27 AM

Go Jeff!!

If I had a digital camera, I'd seriously consider doing something similar...just for the heck of it if nothing else ;)

BoostnBenz 11-17-2003 01:39 AM

Yea, the way I see it I already have the server, the space, and the camera, I just need to put the effort forth to take the pictures and write it up. Writing it up doesn't take that much effort, just pausing to take pictures as I like to keep going rather than taking photo breaks.

redbaronph123 11-17-2003 01:40 AM

darn.. this website should've been up 2 weeks ago... hehehe... oh well.. i already have new boots in mine... so i guess will have to wait for so many thousand miles before i follow your website...ehehhe:D

BoostnBenz 11-17-2003 01:46 AM

Actually it has been up for the last year or so but I didn't have any of the spacing or pictures in it. Just have to finish it off with the printer version and move onto something else, hopefully in much less than a year. :D

jbaj007 11-17-2003 01:59 AM

Great article....great site. Thank you for the information. The job is a little intimidating, but your instructions make it look do-able even for me. :(


All times are GMT -4. The time now is 06:43 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website