PeachParts Mercedes-Benz Forum
Page 2 of 2 1 2
Show 50 post(s) from this thread on one page

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Diesel Discussion (http://www.peachparts.com/shopforum/forumdisplay.php?f=15)
-   -   DIY page, Introduction to Idler Arm Rebuild (http://www.peachparts.com/shopforum/showthread.php?t=86872)

toomany MBZ 04-16-2010 09:48 PM
^ Okay, that's part of the SLS, try a search.

whunter 04-17-2010 12:33 AM
Answer
 
Quote:
Originally Posted by JWJ (Post 2449634)
'85 300TD (wagon)

In the back mostly.
Self Leveling Suspension = SLS hydro pneumatic
http://www.peachparts.com/shopforum/showthread.php?p=1155925



300TD REAR suspension rebuild
http://www.peachparts.com/shopforum/showthread.php?p=373288

300TD suspension rebuild progress
http://www.peachparts.com/shopforum/showthread.php?p=370364

JHZR2 02-24-2011 10:02 PM
Quote:
Originally Posted by musikpal (Post 1689023)
Do: drive + lubricate
Don't: Pull
Can you expand on that? You have to pull one out so you can drive the other one, right? I dont see how one would drive both out...

Also, what would one use to lubricate?

Im hopefully going to do this job this weekend...

Thanks!

Yak 02-25-2011 07:56 PM
My upper bushing came out okay with the bolt, and I used a mallet and an 18 inch strip of wood, maybe 3/4 inch square, as a punch to drive the lower one out.

whunter 08-02-2013 03:43 PM
Replacing the dead link
 
Here is an alternative to the dead link.

PeachPartsWiki: Steering Rebuild


.


All times are GMT -4. The time now is 05:29 AM.
Page 2 of 2 1 2
Show 50 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website