PeachParts Mercedes-Benz Forum - Testing vacuum cruise control servo

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)

- Diesel Discussion (http://www.peachparts.com/shopforum/forumdisplay.php?f=15)

- - Testing vacuum cruise control servo (http://www.peachparts.com/shopforum/showthread.php?t=88952)

Tirebiter

03-10-2004 06:35 AM

Testing vacuum cruise control servo

The smaller of the two open ports is for vacuum and the larger one is a vent. Vacuum applied should hold and the actuator should not move until 12V is applied to the electrical posts. At that time the vacuum will be allowed to drive the actuator and it will draw in.

BTW. I found a limited slip diff :D

All times are GMT -4. The time now is 11:50 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website