![]() |
WOW.. fixed simple oil leak... big difference.
I finally took on the removal of the air filter housing and replaced the tiny O ring that seals the pipe going back under the housing to drain the oil out. I'd been losing around 1 quart per 500 miles... not too bad as I do have a lot of blow by, but now I'm actually dry!.... Easy fix except hard to find the part. Even the dealer had to order it!.
Thought I had many leaks.... turbo drain seals, etc. What a relief. I also thoroughly cleaned out the housing and oil separator. I don't know what's inside, but it was really dirty. I used carb cleaner. |
Jeeze that is a bit of oil! I still need to get an oil seperator for mine after installing the K&N (almost no oil comes out but it is the point....). I thought that seal is normal stock for most online parts places, I replaced mine then about two weeks later replaced the whole stock filter assembly with a K&N on the turbo. :)
|
All times are GMT -4. The time now is 01:25 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website