|
About to change engines mounts and oil pan gasket
I need the torque speq's for the mounts and the oil pan bolts. If anyone has these for the OM601 that would be great! Thanks.
|
Bump
|
Mounts:
Bolts from top = 55Nm Bolts from bottom = 40Nm As far as the oil pan goes, I can't find that info in my CD manual for the 601 engine. My guess is 25-30 Nm. |
If I did my conversion right... 40 Nm is about 29.5 foot pounds? And 55 Nm is about 40.5 foot pounds?
|
Right. To convert Nm to ft*lbs, multiply the Nm by 0.737561.
|
I know this thread is ANCIENT, but I noticed that the torque specs given are WILDLY incorrect. The correct ones are:
Oil Pan to Cylinder Crankcase: -M6 Bolts: 10 Nm -M8 Bolts: 25 Nm |
| All times are GMT -4. The time now is 02:47 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website