After a new paint job on my 87 I am putting all the moldings back on. I've been able to get new clips for every piece except the front upper fender pieces. They are held on with 3 clips that are square with a protruding shaft about 3/8". The clips snaps into the molding which in turn presses into 3 little red buttons on the fender. I have the buttons, but when I tried to get the clips from MB they said they only come with the molding. I am short only two, which broke when I removed them. Anyone know of a source for these clips?
Brian

__________________
Brian
87 300Dturbo 180K #14 head still running R-12 SOLD 12/2017
02 F350 Powerstroke 180K
05 Chevy Express 1 ton w/Royal Utility box 120K
08 Infiniti FX-35 40K
15 Golf Sportwagen TDI 35K
10 Sprinter 3500 chassis with a Class A Winnebago on it. 56K

Try Lowe's. They have a good selection of hardware like that. Some of it specifically for automotive use.

__________________
'85 300SD (formerly california emissions)
'08 Chevy Tahoe
'93 Ducati 900 SS
'79 Kawasaki KZ 650
'86 Kawasaki KX 250
'88 Kawasaki KDX200
'71 Hodaka Ace 100
'72 Triumph T100R

Thanks moraine I'll check with Phil.

__________________
Brian
87 300Dturbo 180K #14 head still running R-12 SOLD 12/2017
02 F350 Powerstroke 180K
05 Chevy Express 1 ton w/Royal Utility box 120K
08 Infiniti FX-35 40K
15 Golf Sportwagen TDI 35K
10 Sprinter 3500 chassis with a Class A Winnebago on it. 56K