Hey all:
I am going to have a new stereo installed soon and will disconnect the fader switch from the console and removing it. I was thinking of putting an ABS on/off switch in the same location. My ABS is currently not working and I would like to be able to turn it off when I want once it is fixed as I prefer performance driving with it off (it seems to hinder turning ability when the ABS kicks in on turns, I guess first generation ABS wasn't perfected yet). How can I wire a switch to do this? I was thinking of using either a dome lamp switch or an air recirculation switch (both of which are on/off switches that fit in the same spot as the fader switch). Any input would be greatly appreciated.

__________________
1985 190E 2.3-16 Euro

I plan to use a rear dome light switch in the fader hole to turn my hard-wired Valentine-1 on & off. But I'd also like to know if it's electrically possible to add a switch for the ABS. Now that would be cool. If you need more swtich holes, you can either buy a shifter wood piece with extra seat heater switch holes, or the dash wood piece with extra holes (up to 9 available for the 124, not sure about the 201).

__________________
Check out my website photos, documents, and movies!