|
|
|
#1
|
|||
|
|||
1989 560SL Vibration
I have a vibration that only occurs @ ~35mph as you accelerate. It does not occur when you first start to drive. As the car warms up and you drive more it begins to get worse. I have learned how to avoid by getting up to 35 backing off the pedal then continue to accelerate.
I have replaced everything know to mankind underneath starting with the engine mounts and working back rear subframe mounts. This group has helped me out before, so I appreciate any ideas. |
#2
|
|||
|
|||
Drive shaft mount bearing? Flex disc couplers?
__________________
Resistance is Futile. |
#3
|
||||
|
||||
Hanger bearing, engine and trani mounts, flex discs fixed mine.
Tires could also be a factor.....too obvious?
__________________
http://www.benzypalooza.com/index.htm |
#4
|
|||
|
|||
Tecqboy & nobby,
Thanks for the response but all of the items you mentioned have already been addressed!! I have had this issue for a very long time. The only thing that I tried was to jack up the springs with spacers. I think it helped but left me with uneven tire wear. This thing has really got me stumped. I like to do things myself so I have not taken it to the MB dealer $$$$$$. I am retired!!! |
#5
|
||||
|
||||
Quote:
Of course, I am wrong more often than right, so this and a buck-fifty would buy you a coffee...
__________________
RM Smith 1988 560SL "Where is it again that we are going, and why are we in this handbasket"? |
Bookmarks |
|
|