|
|
|
|
|
#1
02-08-2005, 02:05 PM
|
|||
|
|||
|
1985 380sl cold start valve.
Is there anyway to test the cold start value. I disconnected the connector to the valve. It didn't make any difference when the car was running and when I first started cold..
I had a lot of problem starting the car a while back. The car would started but after 1 second and stalled. I would have to wait a min or so before the same thing happen again.. But Last week, I started the car again and ran. no stalling.. tried a few days later.. no problem... that really got me going. So I figure that I looked into the cold start valve first.. Thanks BTW.. The wheel I got 15x6.5" ET30 fit prefectly on a 85 380sl..
__________________
Tony S.... 98 MB E320 85 MB 380SL 01 Subraru Impreza (sold) 04 Toyota Highlander 82 25' W/A Cruisers 
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1990 300SEL Cold Start Problems | Qrash | Tech Help | 7 | 11-09-2003 02:02 PM |
| Does E420 have Cold Start Valve? | Joseph_H | Tech Help | 0 | 11-05-2003 05:33 PM |
| Cold start valve for 82 380SEL | Burgenlander | Tech Help | 0 | 11-27-2001 08:43 PM |
| 1991 420SEL - beginning of a cold start problem | DieselGuy | Tech Help | 1 | 07-30-2001 03:56 AM |
| 72 300 sel 4.5 cold start relay and valve | SYDDONNA | Tech Help | 0 | 07-02-1999 10:09 AM |
Threaded Mode
