![]() |
|
|
|
#1
|
|||
|
|||
ignition module
Aloha,
Help for the ignition module bosch,number is 0 227 100 023. What there is connections wire :31,16,15,TD and 3,7?(schem). Thanks you very much! vallyyus@yahoo.com valy/Romania Last edited by valy; 11-01-2005 at 05:09 PM. |
#2
|
|||
|
|||
Valy,
What model car.
__________________
Duke '84 380SL |
#3
|
|||
|
|||
Ignition
|
#4
|
|||
|
|||
I'm not totally clear on what you are asking, but this may help from my CD for a 1980 450SL -
31 - Brown - Ground 15 - Red/black - Power (hot with ignition on) 16 - Black - Coil TD - Green/white - RPM and tach signal to fuel pump relay
__________________
Chuck Taylor Falls Church VA '66 200, '66 230SL, '96 SL500. Sold: '81 380SL, '86 300E, '72 250C, '95 C220, 3 '84 280SL's '90 420SEL, '72 280SE, '73 280C, '78 280SE, '70 280SL, '77 450SL, '85 380SL, '87 560SL, '85 380SL, '72 350SL, '96 S500 Coupe |
#5
|
|||
|
|||
Thanks.
And for wire 3,7? |
#6
|
|||
|
|||
Quote:
|
#7
|
|||
|
|||
I don't see that on the wiring diagram - there are only 4 pins on the connector.
__________________
Chuck Taylor Falls Church VA '66 200, '66 230SL, '96 SL500. Sold: '81 380SL, '86 300E, '72 250C, '95 C220, 3 '84 280SL's '90 420SEL, '72 280SE, '73 280C, '78 280SE, '70 280SL, '77 450SL, '85 380SL, '87 560SL, '85 380SL, '72 350SL, '96 S500 Coupe |
#8
|
|||
|
|||
#9
|
|||
|
|||
This wire is connected on one end to the ICU (the round plug). The other end goes to the distributor, on the side, just under the cap.
Duke
__________________
Duke '84 380SL |
#10
|
|||
|
|||
Wire the ICU is OK. To couple the distribuitor breaking.
|
![]() |
Bookmarks |
|
|