450 wont run/ took apart fuel distributor need parts

[highpowerd2003]

removed my fuel distribitor, seen were it was apart before. tore it down. all the rubber seals are broke apart.two of the brass spring holders are gone. were can i get these metal retainers and rubber seals.thanks for all the help

[Walrus]

Originally Posted by highpowerd2003

removed my fuel distribitor, seen were it was apart before. tore it down.

well, there's your problem ;-)

Save yourself aggravation and grief... source a replacement rebuilt unit. Parts are nigh impossible to source for these things.

[Deltacom]

The diaphragm can be obtained Item 300390827996 here is a pic of the new and old ones. The "O" rings are also sourceable and if you PM your email I can send you a PDF file with step-by-step overhaul procedures and where you can source items required. Please note that cast iron FD had stainless steel diaphragm and the alloy types have silicon/butyl type due to metal reactions between steel and aluminium.

[highpowerd2003]

thanks, i need the small brass pices on the springs also highpowerd2003@yahoo.com

[Deltacom]

The main O seal perish with time and allows "false air" to pass through. Whenever you remove the distributor it is essential to replace the O ring seal and coated with petroleum jelly. Autohouse and Fastlane keeps spares and sealing kits for CIS fuel distributors.