|
|
|
#1
|
|||
|
|||
cruise control - quick question
After studying the past posts here and on the Tech Help Forum, I'm pretty sure I need a cruise control amp.
I'd really appreciate any and all advice on how to proceed economically here...go OEM parts, remanufactured (re-soldered) parts, what's going to be economical now and in the future? thanks in advance. Tom
__________________
Tom '87 560 SL |
#2
|
|||
|
|||
have you tried resoldering your present amp?
__________________
/Per MB E300TDT -98 |
#3
|
|||
|
|||
havent' tried that...it seemed like a delicate procedure...wasn't confident that I could do it.
have you done it successfully?
__________________
Tom '87 560 SL |
#4
|
|||
|
|||
As a matter of fact, yes I have.
It isn't hard at all. You need a soldering iron with a good tip and some good lighting so you see what you do. Took me maybe 30 minutes from start to finish inluding removal/installation of the stuff to get to the box.
__________________
/Per MB E300TDT -98 |
#5
|
|||
|
|||
__________________
Mike Heath 1988 560SL Black/Palomino 1988 300SEL Black Pearl/Burgandy 1984 500SEC Anthracite Grey/Palomino |
#6
|
|||
|
|||
RE cruise control
another good trouble shooting guide is at www.GDL-online.com They also offer rebuilds of your current amplifier/actuator, offer a 4 year warranty at a price less than a rebuild. Also very helpful on the phone. I tried the resolder trick, sent it in, it tested bad. Rebuilding now. Total time out of the car will be about a week.
|
Bookmarks |
|
|