PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Mercedes-Benz SL Discussion Forum (http://www.peachparts.com/shopforum/forumdisplay.php?f=18)
-   -   85 Euro 280SL M110 Engine Compression (http://www.peachparts.com/shopforum/showthread.php?t=38916)

Morphous 05-29-2002 09:57 PM

85 Euro 280SL M110 Engine Compression
 
Hi,

I am seriously considering a 85 280SL Mercedes. I had the motor compression checked. The shop told me it was 170TP across all cylinders. Is the okay?

Thanks,

Morph

mbdoc 05-30-2002 05:34 PM

The compression ratio is 9/1 on that engine & MB lists the warm cranking pressure at 10 to 12bar. And that converts to 150 to 180 psi.

LMM 07-23-2011 10:37 AM

compressionvalues for M110 1984 engine
 
Hi there

I recently purchased a 1984 280SL with (100 000 miles on the clock) and have carrried out a compression test (hot). The result i got is 10.5 bars on all 6 cylinders. Could somebody out there please tell me whether this is accpetable or is the engine sliding towards a major overhaul. I intend replacing the valve stem seals and any worn valves & guides in due course as it smokes like a demon when it is started up after standing. It also used approx 4 pints of oil on a high speed trip (80mph -130kph average speed) of 1000miles (1600km). This led me to believe that there may be piston/oil control ring problems. Any assistance / advice in this regard would be greatly appreciated.

LMM


All times are GMT -4. The time now is 12:39 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website