Excellent body panels, no rust or bondo, clean car, 15" factory alloys w/ "new" Dunlop Sport A2 205/65/15 complete set of 5, great glass, palimino door panels and dask good, seats bad, motor, tranny and electrical bad (heads and crank may be good), std headlights ,tail lights good shape, fuel distributor, and too many of other good parts to list. Let me know what you need and I'll send you prices and pics. By the way, contacting me by e mail is prefered. It's alot easier to keep up w/ everything, thanks.

I have an interest in the wheels and tires, but only if you are close enough that I can look them over first. That would be on the order of somewhere within 200 miles of Washington DC - maybe a little bit more if near an interstate.

Ken300D

__________________
--------------------------
1982 300D at 351K miles
1984 300SD at 217K miles
1987 300D at 370K miles

Sorry, I'm in south Mississippi, HOWEVER; I do have a buddy who is stationed in VA. He comes back and forth from time to time. Maybe I'll let him bring them up next time if you like the pics and we'll go from there. Problem is, I don't know when he'll be back and I know they're gonna send him to Texas soon if not Iraq first. They're in really good shape. You'll be happy with them.

I am REALLY close to an interstate, but I'm "alittle" further than 200 miles.

P/s quote: Driver's side front turn signal; rear driver side tail lamp; driver side front fender; left side hood spring assy; driver side front steering knucle/spindle must be from ABS brake equipped car.
Karl

Hi, Need paasenger side front turn signal lense and hood star. What's wrong with seats? Do you have a good lower front seat frame (springs, no electrics/motors needed)?

Thanks, Juergen

PM's and requested emails sent. Thanks guys.

I have a 1985 500 SEC.

Might you still have the idle speed control module and cruise control module from this car?

My idle speed control module is 002 545 33 32. I don't have the cruise control module number handy.

I need those Palomino speaker grilles on the rear deck if they have not been brutalized by the sun.

Also could use some lower body cladding on the right side if in excellent shape.

The taillights would be of interest......but......only if really perfect. The diesels get sooted up a bit.

Finally, the rear bumper would be of interest, but the distance may rule it out.

TIA.

I could use a few spare parts if they are really cheap.
I'm in BC Canada though so shipping may be an issue, maybe not.
I need:
Front bumper chrome plate.
Front bumper surround.
OVP relay
condensor
rad
the l.e.d. gizmo in the dashboard which shows outside temperature.
a zebrawood panel to go around the shifter, mines cracked.
the headlights,
the plastic surrounds around the headlights
the plastic grille insert with the chrome strips (not the frame, mines good)
the driver door striker block/guide thingy and the 4 screws. (My f 'ng door wont close, I have to slam it 5/6 times to get the f$%^ thing shut.)
I'm assuming its this, but visually mine looks fine.
thats all I can think of for now.

Drivers outside door handle & key.

Strange request, but I would like a price on the alternator adjusting arm (with the holes in it). Thanks - please PM me.

__________________
86 560SL
With homebrew first gear start!
85 380SL
Daily Driver Project

http://juliepalooza.8m.com/sl/mercedes.htm

Pm's and requested emails sent.

If at all possible, please e mail me if interested instead of replying or PM. It's alot easier to keep track of everyone and everything from one place. Thanks.

email sent.

Driver's door panel Palamino door pull.

__________________
Thank You!
Fred
2009 ML350
2004 SL600
2004 SL500
1996 SL600
2002 SLK32
2005 CLK320 cabrio
2003 ML350
1997 C280 Sport