1987 300SDL Parts Car --- What do you want? - PeachParts Mercedes-Benz Forum

daw_two · #1 04-08-2009, 11:53 PM

Edit: 09/27/2009 --- Parts car is gone. I still have a few parts from it. I will update this thread later this week with the parts that are left in my possession. The parts car has a new owner and is resting quietly in central(ish) Ohio.

Edit: 08/30/2009 --- This post has been updated to reflect the center console wood is available in the package of wood trim. See Item #3 below.

STILL AVAILABLE --- folks keep asking about these:
1) The rear seat (rare reclining seat option) is still available. The bottom has about a 4 inch split near the arm rest. The back is in very good condition. Asking $100 for both pieces. I will not ship at these price levels. If someone wants just the cover from the back, I may consider separating ---- the springs are in very good condition.

2) The ignition key looks very new. Comes with 2 keys. All locks will be sold as a set --- trunk, glove box, ignition, and front door handles. Asking $100 for the entire lockset. SALE PENDING.

3) The center console is very nice as you can tell as is all the wood. I would like to sell all the wood as a set if next car does not need center console. Asking $150 for the center console, dash wood (includes glovebox), all wood trim from all 4 door panels. Also includes the ashtray and the wood trim where ACC and switches are located. SALE PENDING.

4) Interior Panels are available. Driver's side rear is sold. Driver side front --- SALE PENDING. All other panels are still available.

Glow Plug Relay $30 sale pending??
Radiator $40 <-------- Price Reduced, again.
Crossover Tube $60
Radiator overflow tank $10
Contraption under the air filter box --- Free; pay shipping.
Becker Radio w\code $100; if code is not present $40
Wiper Assembly and motor $120
OVP relay $40
Both Exhaust pieces $80 --- I'd prefer not to have to take them apart. <--- Price Reduced, again.
Reclining Rear Seat motor $100.
Reclining Rear Seat switches $20 each

Items almost taken:
FRONT Seats --- next car.
ACC, Kilma, AC compressor --- Coda; until I have COLD AC.

SOLD ITEMS:
Aux Coolent Pump is pending
Wiring Harness is pending
Injection pump is pending
Wood trim package is pending
Lock package is pending
Rear Shelf ---- rear seat (both pieces) is still available
Front Bumper
Power Steering Pump
Alternator
Driver Side rear inside door panel including the handle and window trim
Fuel Injector Lines
Air Filter box with lid
Turbo
Oxy Cat Exhaust Pipe
Valve Cover
Intake Manifold
Passenger side electric outside mirror
Vacuum Pump
Aux Fan
Vacuum Amp
Passenger Side Fender
Air Filter Box
Fan Clutch and plastic fan are taken as is the plastic shroud
Electric AUX fan
Main vacuum line from pump to brake booster
Rubber Seal under hood closest to the windshield
Instrument Cluster
ABS sensors

Please see page 3 of this thread for additional pics.

TheDon · #2 04-08-2009, 11:58 PM

oh man.. rear reclining seats... I think I might pass on that body cladding for now

TylerH860 · #3 04-09-2009, 12:56 AM

Gee, I wonder what happened to the head?

TX76513 · #4 04-09-2009, 09:22 AM

How many injector lines are left? What is the condition of the hood?

LUVMBDiesels · #5 04-09-2009, 09:57 AM

How much for the exhaust manifold tube going to the turbo? I want to drill and tap a pyrometer. Also does the Becker work? If so, how much for it?

Too bad about the KLIMA, I could have used it

Oh one other thing, the sunglass cup attached to the shift console, how much? I want to mount the boost and pyro there. I have the one from my SD but it is gray... Come to think of it, how much for the wood surrounding the shifter and the power window switch (left side) Mine blew a bulb for the driver's window...

I'm sure I will think of more things as the day goes on

You can PM me with the price list if you want...

Joe

TheDon · #6 04-09-2009, 10:49 AM

Quote:

Originally Posted by bgkast

How much for the turbo badge?

my badges do not look like that... must be mid year change or something

daw_two · #7 04-09-2009, 10:51 AM

Please post your request on here. I plan on sending pricing information in PMs.

Haven't heard from injector line buyer, yet, but he is not a regular on this forum ---- yet.

Hood is not original; I think the good hood was pulled and this hood was put in its place; as I recall it had a hole in it, but I will double check this weekend.

The PO pulled the head to keep --- that wasn't the issue with the engine; the problem with the engine is one of the cylinder walls needs to be bored out.

LUVMBDiesels --- sunglass cup? Do you mean the coin tray? I can't see the pics here at work. I'll have to look at the project car before I can comment on the center console.

daw_two · #8 04-09-2009, 10:51 AM

Quote:

Originally Posted by TheDon

my badges do not look like that... must be mid year change or something

Coda's badges do. Maybe your badges are "customized".

Tymbrymi · #9 04-09-2009, 11:21 AM

I'm interested in:

Horns
The actual exhaust manifold to the head (not what LUVMB wants)
Intake manifold and crossover pipe
Left rear door handle
Left rear door latch
Right rear window motor
Rear hard brake line
Some of the dashboard wood trim
Aux water pump
IP (depending on how cheap)

Would you be willing to let me drive up there and help you take the parts off? It will cost about $30 round trip from Starkville, and shipping will easily cost that much.... Also, the brake line will be a good size, and maybe I could get a discount if I helped you pull the parts off

Besides, I'll be looking at the car and go "Ooh! I also need that!"

daw_two · #10 04-09-2009, 11:38 AM

PMs sent to all perspective buyers.

TheDon · #11 04-09-2009, 11:40 AM

oh wait, nvm.. they are the same.. I thought mine didnt have the bar under the letters.

Actros617 · #12 04-09-2009, 07:57 PM

How for all 5 of the rims...

04 Diesel · #13 04-09-2009, 08:20 PM

How much for the radio? Does it work?

daw_two · #14 04-09-2009, 09:47 PM

Quote:

Originally Posted by Actros617

How for all 5 of the rims...

Wheels have already been offered to someone else.....because I KNEW he needed them for his pristine 300SDL. If he doesn't take them, I'll be in touch with you.

daw_two · #15 04-09-2009, 09:48 PM

Quote:

Originally Posted by 04 Diesel

How much for the radio? Does it work?

LUVMBDIESELS has first right of refusal. He asked first.