240d automatic transmission crossmember
Hello,
Looking to buy a used 240d automatic transmission crossmember. If you got one let me know. Thank you for your time. |
I'm sure I have one. Do you have a picture of one so I can be sure and get the right one?
|
I think i may have a photo of it some where? i will find it and post it. thanks
|
i am also looking to get the shifting rods as well, the ones i have got bent by the guy who removed them.
|
I try to straighten the rods. Can't be that hard if he bent them by accident can it?
I was looking for something else this morning and found two cross members. I probably have others as well. When you post the pic please include the distance between the bolt holes side to side. |
Tom - I measured mine between the two rear mounting holes and got 11" on center. That measurement should be a little higher for the front two holes as the trans tunnel tapers in towards the back.
|
thank you StaggerLee.
do you still need a pic? If you have one let me know....thank you again. you should see these shift rods! one is bent so bad it looks like a "C"! I do not know what that guy did, but he messed those puppies up good. |
Sorry it has taken me so long to post a picture of the cross member, as I am a technological moron! Can any body tell the easy way to do this? Thanks!
|
All times are GMT -4. The time now is 07:05 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website