PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Mercedes-Benz Used Parts For Sale & Wanted (http://www.peachparts.com/shopforum/forumdisplay.php?f=8)
-   -   w123 w126 gas diesel parts last call (http://www.peachparts.com/shopforum/showthread.php?t=328739)

Hogweed 11-01-2012 12:20 PM

w123 w126 gas diesel parts last call
 
i'm tired of looking at these cars and the parts are not in great demand anymore, from what i can see. so i'm going to be junking the lot and moving on in the next 3-6 months. i have w123 sedans and wagons, w124 diesel sedan, gas wagon, complete 603 motor and trans w/ 180k, extra #14 head, w126 gas and diesel cars, a 1991 560sec coupe w/ a good 14ok motor & trans, gas and diesel ponton cars, w108 complete and parts cars and many many other parts.
let me know what you need before the go away.

w123 w124 w126 w108 ponton parts

greaser 11-01-2012 01:00 PM

Idler Arm Assembly
 
Hogweed, I am looking for an Idler Arm Assembly for a 1983 300SD in good shape. Some other years of this model fit this car. If you have one close, send me the VIN and I'll check with MB to see if they take the same part.

Ted
(Greaser)

JamesDean 11-01-2012 01:08 PM

Hogweed,

Have you got any cruise control parts in that lot? Vacuum servos, actuators? amps?

daw_two 11-01-2012 05:26 PM

IS the:
complete 603 motor and trans w/ 180k

a runner? Have you heard it run? Did it come out of a moving rust bucket? I might be interested. Can you hold onto it for another month?

Raptelan 11-01-2012 05:49 PM

Can you post some pictures? I might be interested in the 560sec if it's in drivable condition as I'd like to transplant the drivetrain into an older (116) chassis and a complete donor car would make that an actually feasible plan as it would have all sorts of required parts available - what's your asking price? Also you're going to junk Pontons?!? Are they badly rusted or ...? Complete 108's are appealing too... I need a bigger garage! ;)

Dubyagee 11-01-2012 05:57 PM

Where are these cars. On my phone and it doesnt show


Sent from my iPhone 4

w123love 11-01-2012 06:35 PM

From his signature:

Quote:

Centrally located in North East Central Pa.

Dubyagee 11-01-2012 07:40 PM

Doesn't show sigs on my phone but thanks

Hogweed 11-01-2012 08:31 PM

i have an '84 SD a '90 SE an '87 SEL so i'm sure i have a good one. '90 was my dd for 2 years ans was tight so check if that one is compatible
Quote:

Originally Posted by greaser (Post 3040663)
Hogweed, I am looking for an Idler Arm Assembly for a 1983 300SD in good shape. Some other years of this model fit this car. If you have one close, send me the VIN and I'll check with MB to see if they take the same part.

Ted
(Greaser)


Hogweed 11-01-2012 08:32 PM

sec was dead-centered into a telephone pole so it doesn't drive. could be made to run again althought the fuel dist was donated to another member
Quote:

Originally Posted by Raptelan (Post 3040864)
Can you post some pictures? I might be interested in the 560sec if it's in drivable condition as I'd like to transplant the drivetrain into an older (116) chassis and a complete donor car would make that an actually feasible plan as it would have all sorts of required parts available - what's your asking price? Also you're going to junk Pontons?!? Are they badly rusted or ...? Complete 108's are appealing too... I need a bigger garage! ;)


Hogweed 11-01-2012 08:33 PM

as usual, most of the cruise stuff is in-op or unknown condition as i acquired most of these fine cars after they were drivers. i do have a box of amps in my shop....
Quote:

Originally Posted by JamesDean (Post 3040675)
Hogweed,

Have you got any cruise control parts in that lot? Vacuum servos, actuators? amps?


colincoon 11-01-2012 08:33 PM

300TE or E320 wagon?

Hogweed 11-02-2012 11:53 AM

wagon is a 300te
Quote:

Originally Posted by colincoon (Post 3040954)
300TE or E320 wagon?


dpo73 11-02-2012 05:31 PM

need a vacuum pump for my 1984 300d,have one?

gatorblue92 11-02-2012 08:19 PM

What W123 stuff have you got?


All times are GMT -4. The time now is 02:04 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website