As the title states, I've got:
A nice 25mm front sway bar from a 300TD W123 wagon ($100 + S&H)
A clean 2.88 Differential off an 85 300D W123 ($370 + S&H)
Several Factory sealed ALDA ($20 each + S&H)
&
Several working VCV's for assorted years ($20 each + S&H)

I will accept local pickup, PM if interested, I will barter, haggle, and trade too!

The sway bar is in great condition and will make a nice upgrade to any W123 Sedan or Coupe with the right bushings (replaceable part). Its supposedly rated to be 20% stiffer, which will lower body roll in cornering, and help keep the car level.

The 2.88 rear end has clean gears and smooth bearings, & the lower gearing in the 2.88 will make your off the line take off minutely slower, but will lower your cruising RPM's, and in the long term, put less stress on your engine, fuel economy, and ears. Its widely considered an upgrade to the 3.07, because it puts the first gear in a better length and overall will make your cruising even more enjoyable. (figure around 2500 RPM at 75MPH)
I can reseal it upon your order, otherwise it would be wise to reseal it before installation.


I will accept local pickup, PM me if you are interested in any of these parts, I will barter, haggle, and trade too!

__________________
A junkyard is not for junk

Interested in the front sway bar.. Where are you located?

(So Cal) Private message sent!

__________________
A junkyard is not for junk

*bump 1* bump 2*

__________________
A junkyard is not for junk