ML 320 Oil and Filter Change
 

Recently purchased a 2002 ML 320 my First Merc ever WOW!!
Apparently the certifying engineer/mechanic changed oil to synthetic

Can someone please respond and/or comment on the following:

* Can someone please tell me what (a) synthetic & (b) conventional oil and viscosity should I use and why that specific oil eg. you have used the specific oil mentioned on 20 occasions over km 80 000 or you are a mechanic etc. Any pictures?
(PS same questions above also apply to transmission filter change if you have the time)

*Someone was kind and diligent enough to post the entire ML 320 oil change procedure with pictures on this site (Thats what you call a Merc Man)
Can someone send me the weblink, I am to dumb to find same.

* What oil filter will I need and where will I purchase one on line. Does Fram, motorcraft etc manufacture them - perhaps then I can purchase one at walmart etc. And why this specific one, have you opened one up before and looked inside (i.e. determined its filter materials and compared it with another) If you have a picture of one or model no.

* Where, how much and how extensive - ML320 workshop manual

*Any pictures or Diy advise on rear ball joint replacement?


Please and Thank you

Welcome,
As far as the oil & filter....use Mobil 1 0W-40 and a factory "fleece" filter..
MB number 000-180-26-09 or 000-180-31-09.

fleece filter
 

I purchased filter from dealer -$26-now I know why it is called a fleece filter.

A good sense of humor is VITAL to ML ownership......you passed with flying colors !!

Seriously......many parts, such as filters, can be obtained from other sources, including this site, for quite a bit less than the dealers.

hi smith
 

im doing a ml320 1999 oil change i need the tutorial,can you help me out?

This should do it http://www.peachparts.com/Wikka/OilFilter2