I cleaned my EGR Tube and didn't break anything!
 

It fixed the P0400 code which kept my CEL lit.
I also created a DIY for this as I couldn't find one anywhere.
I hope this helps someone else who decides to tackle this job.
send me an e-mail at ordway.dc@pg.com if you want a copy.
It is too large to post here (490kb)

Better yet... does anyone know where I can host a document like this? That way I could post a link here and the DIY would be a click away


-Dave

Dave -- Thanks for going to the trouble of writing it up. I'd like a copy and will send PM.

But there are already a few threads on this process including this one:
http://www.peachparts.com/shopforum/showthread.php?t=211583&highlight=egr

I saw that write up, but it left many question open for me. I did not want to break anything, so I was careful, and I thought some other people may appreciate a DIY with pictures and watch outs. Hope you're not offended.
By the way sunedog, I really like your quote.