Hi,
I need to replace the drivers side catalytic converter on my 2001 ML 320. According to the instructions, the front springs have to be removed. There is a reference to WIS: AR32.20-P-0200GH. If you have this document, could you please post it or email it to me. If not, if you give me some instruction on removing the front springs I would appreciate it.

I am in the "gather all information before beginning the job" stage.

Any information you can provide would be greatly appreciated.

Removal of the torsion bars require marking the tensioning bolt(s) and turning them 80-100 turns by hand.

If you need that doc from wis send me a PM or e-mail so I have your address.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator

Thanks!!!!!

I just pm'ed you my email address.